BT 60 is a legacy burst telemetry device for transferring recorded data from compatible loggers, not a replacement for the logger. Bosch's DDU 8 manual describes a 5 GHz system with Ethernet to DDU 8, C 60 and C 55, up to 12 Mbit/s and partial track coverage. Actual service and radio compliance depend on hardware and region. Bosch DDU 8 manual, burst telemetry section.

Connector and wiring
The cited source describes Ethernet, the radio antenna and compatible receiver, but does not identify a complete numbered connector pinout. Obtain the precise unit and harness documentation before wiring; this is a functional layout, not a pin assignment.
Installation and related information
Confirm the precise model, hardware revision, enabled options and manufacturer's wiring diagram before connecting. Use correct power protection, sensor limits and the chosen ECU protocol; a compatible connector does not guarantee compatible data. Configure in the appropriate Bosch software and verify a short recording or connection. See the Bosch Motorsport manufacturer overview.