Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch Motorsport

FM 40 is a legacy half-duplex RF telemetry modem, not a standalone data logger. Bosch documents 430–470 MHz hardware variants, 1–10 W transmit power, 9.6/19.2 kbps RS232 data and a 10–18 V supply. It requires appropriate car antenna, receiving equipment, permitted radio frequencies and logger configuration. Bosch FM 40 system overview.

Bosch FM 40 telemetry unit
Bosch FM 40 telemetry unit. Image: Bosch Motorsport, reproduced with permission. Manufacturer source.

Connector and wiring

Bosch lists a BNC female RF connection and CGK SOT 8N35 PN power/data connector. The source does not provide a verified pin-by-pin map; obtain the correct FM 40 harness drawing from Bosch before connecting. The overview below is a signal-path schematic.

FM 40 signal paths
FM 40 signal paths. Original wiki functional schematic, not a connector-face view. Source: Bosch Motorsport documentation; use the manufacturer's drawings and pin numbers.

Installation and related information

Confirm the precise model, hardware revision, enabled options and manufacturer's wiring diagram before connecting. Use correct power protection, sensor limits and the chosen ECU protocol; a compatible connector does not guarantee compatible data. Configure in the appropriate Bosch software and verify a short recording or connection. See the Bosch Motorsport manufacturer overview.