CG 3.2 combines dual 5G modems with 4G fallback, GNSS, Wi-Fi, Ethernet, CAN-FD, RS232 and 16 GB onboard storage. Bosch describes RaceConnect Cloud live telemetry, but rollout of individual functions, data plans, coverage and regional approval depend on configuration and current service. Bosch CG 3.2 product specification.

Connector and pinout
Bosch lists AS612-35SN as mating connector. The following is connector A as numbered by Bosch. Ethernet and serial data are named from the unit's perspective. The diagram is conceptual, not a physical cavity view; use the manufacturer's numbered diagram.
| Pin | Function |
|---|---|
| A-1 | COMSCR Ethernet cable screen |
| A-2 | ETHA_TRX− |
| A-3 | ETH3_TXN |
| A-4 | ETH3_RXP |
| A-5 | ETH3_RXN |
| A-6 | ETH2_TXP |
| A-7 | ETH2_RXP |
| A-8 | ETH1_TXP |
| A-9 | ETH1_TXN |
| A-10 | ETH1_RXP |
| A-11 | CAN1_H |
| A-12 | Reserved |
| A-13 | GND supply |
| A-14 | V_BAT 8–18 V |
| A-15 | ETHA_TRX+ |
| A-16 | ETH3_TXP |
| A-17 | ETH2_TXN |
| A-18 | ETH2_RXN |
| A-19 | ETH1_RXN |
| A-20 | CAN1_L |
| A-21 | RS232_RX |
| A-22 | RS232_TX |
Four gold SMA sockets serve mobile antennas, one gold SMA GNSS and one silver reverse-polarity SMA Wi-Fi. Correct antenna selection, data plan, cable routing and series rules must be checked.
Installation and related information
Confirm the precise model, hardware revision, enabled options and manufacturer's wiring diagram before connecting. Use correct power protection, sensor limits and the chosen ECU protocol; a compatible connector does not guarantee compatible data. Configure in the appropriate Bosch software and verify a short recording or connection. See the Bosch Motorsport manufacturer overview.