Davis Technologies CT2-SL · Davis Technologies traction control systems
Scope
Davis CT Series instructions, Appendix B, printed page 32, describe the three-pin Weather Pack plug option for CT-1, CT2-SL and CT3-SL series units. This page is scoped to CT2-SL with that three-pin option. Identify terminals by their moulded letters and confirm the installed ignition and harness against the manufacturer's illustration before wiring.
| Weather Pack terminal | Wire | Connection | Nano-Fit reference in manual |
|---|---|---|---|
| A | Red | Battery positive | 1 |
| B | Black | Battery negative | 4 |
| C | Purple or white | Positive distributor pickup wire | 7 |
The same manual separately shows a four-pin option, where C is the negative distributor pickup and D is the positive pickup. Do not transfer the three-pin terminal letters to that connector. Use the manufacturer’s ignition-specific diagram and settings; the referenced Nano-Fit numbers identify the corresponding terminals and are not Weather Pack cavity numbers.
Source
Davis Technologies CT Series instructions, Appendix B, printed pages 32–33.