Tuning Wiki

Davis Technologies CT2-SL · Davis Technologies traction control systems

Scope

Davis CT Series instructions, Appendix B, printed page 32, describe the three-pin Weather Pack plug option for CT-1, CT2-SL and CT3-SL series units. This page is scoped to CT2-SL with that three-pin option. Identify terminals by their moulded letters and confirm the installed ignition and harness against the manufacturer's illustration before wiring.

Weather Pack terminalWireConnectionNano-Fit reference in manual
ARedBattery positive1
BBlackBattery negative4
CPurple or whitePositive distributor pickup wire7

The same manual separately shows a four-pin option, where C is the negative distributor pickup and D is the positive pickup. Do not transfer the three-pin terminal letters to that connector. Use the manufacturer’s ignition-specific diagram and settings; the referenced Nano-Fit numbers identify the corresponding terminals and are not Weather Pack cavity numbers.

Source

Davis Technologies CT Series instructions, Appendix B, printed pages 32–33.