Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Datalogging and telematics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Autosport Labs

PodiumConnect MK2 is a discontinued interface for sending data from a compatible logger or ECU to Podium; it also provides local SD recording.

PodiumConnect MK2 telemetry interface
PodiumConnect MK2. Image: Autosport Labs; reproduced with permission. Manufacturer product page.

Specifications and operation

The PodiumConnect MK2 is a discontinued earlier interface with two CAN buses and local SD logging. The product page includes cellular specifications and compatible source examples, but its regional modem and network statements differ within the page; confirm the actual fitted variant and current network support before acquiring or using an older unit. The manufacturer suggests Micro or RaceCapture/Track as more modern alternatives.

The manufacturer lists two CAN buses, RS232, Wi-Fi and microSD recording. Its published regional cellular descriptions differ; confirm the modem, network support, SIM and subscription for the exact unit. MK2 product specifications.

Pigtail pinout and wiring

PodiumConnect Micro and MK2 M8 power and CAN schematic
Functional schematic, not connector-face view. Original wiki diagram based on PodiumConnect Micro and MK2 guide.
M8 four-pin pigtailSignal
1CAN low
2Power, 9–24 V
3CAN high
4Ground

These assignments are documented for the named male pigtail. Select the proper adapter and confirm the manufacturer drawing, cavity markings, cable colours and device generation before wiring. Match CAN bitrate, decoding and network termination.

Additional connectors and any serial adapter require the specific MK2 harness; do not assume the older MK1 cable is interchangeable. Manufacturer setup guide.

See the Autosport Labs manufacturer guide.