Tuning Wiki

PodiumConnect MK2 is a discontinued interface for sending data from a compatible logger or ECU to Podium; it also provides local SD recording.

PodiumConnect MK2 telemetry interface
PodiumConnect MK2. Image: Autosport Labs; reproduced with permission. Manufacturer product page.

Specifications and operation

The PodiumConnect MK2 is a discontinued earlier interface with two CAN buses and local SD logging. The product page includes cellular specifications and compatible source examples, but its regional modem and network statements differ within the page; confirm the actual fitted variant and current network support before acquiring or using an older unit. The manufacturer suggests Micro or RaceCapture/Track as more modern alternatives.

The manufacturer lists two CAN buses, RS232, Wi-Fi and microSD recording. Its published regional cellular descriptions differ; confirm the modem, network support, SIM and subscription for the exact unit. MK2 product specifications.

Data analysis software

Podium lap analysis comparing speed traces and time gaps
Podium lap comparison showing speed traces and time gaps in an earlier interface. Image: Autosport Labs, reproduced with permission; manufacturer image source.

The manufacturer documents the RaceCapture app for configuring PodiumConnect and SD-card data logging. Podium supports reviewing transmitted or uploaded data when the device and service are compatible; this discontinued model's cellular network support must be checked for the installed hardware. See the manufacturer model guide and RaceCapture app guide for setup and analysis. Download the RaceCapture app from Autosport Labs; Podium is the separate online telemetry and session-analysis service. For system requirements and software details see the Autosport Labs manufacturer page.

Pigtail pinout and wiring

PodiumConnect Micro and MK2 M8 power and CAN schematic
Functional schematic, not connector-face view. Original wiki diagram based on PodiumConnect Micro and MK2 guide.
M8 four-pin pigtailSignal
1CAN low
2Power, 9–24 V
3CAN high
4Ground

These assignments are documented for the named male pigtail. Select the proper adapter and confirm the manufacturer drawing, cavity markings, cable colours and device generation before wiring. Match CAN bitrate, decoding and network termination.

Additional connectors and any serial adapter require the specific MK2 harness; do not assume the older MK1 cable is interchangeable. Manufacturer setup guide.

See the Autosport Labs manufacturer guide.