Mustang Dynamometer makes chassis and engine dynamometers and associated data-acquisition equipment. It is a test-equipment manufacturer; the company name should not be confused with the Ford Mustang model of car.

History and organisation
The company traces its beginnings to 1975, initially importing electromagnetic brakes before expanding into dynamometer and test-system engineering. It identifies Mustang Dynamometer as the standard dynamometer business and Mustang Advanced Engineering as a related business focused on more specialised testing. Mustang: company overview.
Representative equipment
- MD-500-SE XL: a two-wheel-drive roller chassis dyno with an air-cooled eddy-current absorber. A manufacturer brochure describes an inertia flywheel and upgrade path to an AWD roll set; specification depends on build. MD-500-SE XL brochure.
- MD-600: a larger roller chassis series described for trucks, SUVs and larger vehicles, with eddy-current loading and a load cell. MD-600.
- MD-AWD-500: a mechanically linked all-wheel-drive chassis family. The linked rollers coordinate the front and rear roller speeds; versions and absorber configuration vary. MD-AWD-500 Legacy XL.
- Mustang Advanced Engineering axle-hub dynos: hub-coupled systems using AC machines, supplied in configurations including 2WD and 4WD; regenerative drives are available on appropriate systems. See Mustang Advanced Engineering and hub dynamometers.
- Crossover / ED-140-20: a 2011 documented engine/chassis combination with a removable dual eddy-current engine absorber connected to an MD-1100 chassis dyno. This is a historical example, not an assertion of current availability. 2011 Crossover announcement.
Controllers and software
PowerDyne is Mustang's documented control and data-acquisition software family; historical installations include separate PowerDyne chassis and EDtCell engine controls. Its later Hole Shot system is web-based, with a closed-loop controller for supported performance chassis dynos. The 2025 catalogue describes the transition and system functions. Retrofitted machines can differ from their original specification. 2025 product catalogue.
Check roller diameter, mechanical linkage, single or dual absorbers, control generation, sensors and continuous as well as peak capacity before selecting parts or assessing a used machine. See Rolling-road dynamometers.
Explore the Dynamometers section and the manufacturers and suppliers directory. Model names, control hardware and support can change; identify the exact machine and its configuration before ordering parts or comparing specifications.