Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Dynolyze designs and manufactures hub dynamometers in Finland. Its units couple to the driven hubs using adapters and use air-cooled eddy-current absorbers to provide load. Depending on configuration, two or four units test a 2WD or 4WD vehicle. See Hub dynamometers and the manufacturers directory.

Two Dynolyze SMALL hub dynamometer units with adapters and wheeled frames.
A pair of Dynolyze SMALL hub-dyno units. Image: Dynolyze, used with permission.

Background

Dynolyze's account names Janne Näränen and Noora Saarinen as founders. It dates development of the first commercial hub dyno to 2018–2019 and the first customer delivery to early 2020. These are the maker's dates and do not establish a date for every model.

Hub-dyno models

  • SMALL: compact eddy-current hub unit, available as a pair for 2WD or combined for 4WD.
  • SMALL PLUS: a compact model with a longer hub reach and greater braking capacity than SMALL according to the supplier. It can be paired in different 4WD combinations.
  • MEDIUM: a higher-capacity eddy-current unit with an extended shaft option, intended for higher torque and power applications.

See Dynolyze dynos and the SMALL PLUS announcement. The maker notes that braking power depends on hub speed and brake temperature; calculated maximum braking power is not an unconditional continuous power rating.

Brake and control principle

Each hub drives an eddy-current absorber. The electrical control system changes excitation to apply resistance, and the absorbed shaft energy is dissipated as heat. Dynolyze states that these brakes are air-cooled and do not require the external water or oil circuits of a hydraulic absorber. Manufacturer FAQ.

Dynolyze describes its own control electronics, firmware and software. The package varies with model and may include a computer, sensors, weather station and adapters. Confirm sensor and hub-channel capacity, adapter fitment, power supply and support for the specific AWD drivetrain before ordering. The system measures at the hubs; any engine-power figure derived using coastdown is an estimate.

Manufacturer descriptions checked 17 November 2026. Configurations and availability can change.