Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
ABS / DSC
Parent
Bendix EC-60 ABS ATC ESP
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bendix

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

ABS and traction systems · Parent system

Identification and documented application

Bendix SD-13-4869 identifies the Advanced Cab controller and its four AMP harness connectors X1–X4. It must be distinguished from Standard and Premium Frame variants. The manufacturer table is a controller-variant reference, not a vehicle-specific fitting claim.

Identification limits

Record the vehicle VIN, market, complete vehicle-maker and supplier part numbers, equipment, software and coding. A family name alone does not prove fitment, connector compatibility or feature availability. Consult the exact vehicle service information for diagnosis, replacement and calibration.

Hardware and mountingBendix describes Advanced EC-60 controllers supporting configurations up to six wheel-speed sensors and six pressure modulator valves with automatic traction control and drag torque control. Depending on the configuration they can support hill start assistance. Its service information specifies that the cab-mounted controller requires an environmentally protected location and identifies AMP MCP 2.8 connectors. The fitted vehicle and controller configuration determine which functions are actually available.Source: Bendix EC-60 Advanced service information, hardware and mounting.

Sources

Bendix SD-13-4869, printed p. 44

Application-specific connector references

Bendix EC-60 Advanced Cab X1 X2 X3 X4 pinout

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Bendix EC-60 Advanced Cab

ABS and traction systems · Parent system

Identification and documented application

Bendix SD-13-4869 identifies the Advanced Cab controller and its four AMP harness connectors X1–X4. It must be distinguished from Standard and Premium Frame variants. The manufacturer table is a controller-variant reference, not a vehicle-specific fitting claim.

Identification limits

Record the vehicle VIN, market, complete vehicle-maker and supplier part numbers, equipment, software and coding. A family name alone does not prove fitment, connector compatibility or feature availability. Consult the exact vehicle service information for diagnosis, replacement and calibration.

Sources

Application-specific connector references

Revision 3: Bendix EC-60 Advanced Cab

ABS and traction systems · Parent system

Identification and documented application

Bendix SD-13-4869 identifies the Advanced Cab controller and its four AMP harness connectors X1–X4. It must be distinguished from Standard and Premium Frame variants. The manufacturer table is a controller-variant reference, not a vehicle-specific fitting claim.

Identification limits

Record the vehicle VIN, market, complete vehicle-maker and supplier part numbers, equipment, software and coding. A family name alone does not prove fitment, connector compatibility or feature availability. Consult the exact vehicle service information for diagnosis, replacement and calibration.

Hardware and mounting

Bendix describes Advanced EC-60 controllers supporting configurations up to six wheel-speed sensors and six pressure modulator valves with automatic traction control and drag torque control. Depending on the configuration they can support hill start assistance. Its service information specifies that the cab-mounted controller requires an environmentally protected location and identifies AMP MCP 2.8 connectors. The fitted vehicle and controller configuration determine which functions are actually available.

Source: Bendix EC-60 Advanced service information, hardware and mounting.

Sources

Application-specific connector references