ABS and traction systems · System reference
Scope and connector
Bendix SD-13-4869 printed p. 44 identifies four AMP wire-harness connectors X1–X4 for the EC-60 Advanced Cab. Pin numbers are connector-specific. This is not the Standard Frame or Premium Frame assignment. Manufacturer abbreviations are retained where their exact expansion depends on the pneumatic system: WSS wheel-speed sensor, PMV pressure modulator valve, SA steer axle, DA drive axle, AA additional axle, HLD hold, REL release, CMN common, ORS off-road switch, SLS stop-lamp switch, TCV traction control valve. An asterisk in the source marks AWD-only equipment.
Documented terminal assignments
| Terminal | Documented connection |
|---|---|
| X1/1 | Ground |
| X1/2 | Trailer ABS indicator |
| X1/3 | Ignition |
| X1/4 | TCV common, drive axle |
| X1/5 | TCV, drive axle |
| X1/6 | ATC/ESP indicator and ATC off-road switch |
| X1/7 | J1939 low |
| X1/8 | J1939 high |
| X1/9 | Stop-lamp switch input |
| X1/10 | Drive-axle right wheel-speed sensor + |
| X1/11 | Drive-axle right wheel-speed sensor − |
| X1/12 | ABS indicator ground |
| X1/13 | J1587 B |
| X1/14 | J1587 A |
| X1/15 | ABS indicator interlock |
| X1/16 | Battery |
| X1/17 | Retarder |
| X1/18 | ABS dash indicator |
| X2/1 | Steer-axle left PMV hold |
| X2/2 | Steer-axle left PMV release |
| X2/3 | Steer-axle left PMV common |
| X2/4 | Steer-axle right PMV hold |
| X2/5 | Steer-axle left wheel-speed sensor + |
| X2/6 | Steer-axle right PMV common |
| X2/7 | Steer-axle right PMV release |
| X2/8 | Steer-axle left wheel-speed sensor − |
| X2/9 | Drive-axle right PMV common |
| X2/10 | Drive-axle right PMV hold |
| X2/11 | Steer-axle right wheel-speed sensor + |
| X2/12 | Drive-axle left PMV common |
| X2/13 | Drive-axle right PMV release |
| X2/14 | Steer-axle right wheel-speed sensor − |
| X2/15 | Drive-axle left wheel-speed sensor + |
| X2/16 | Drive-axle left PMV hold |
| X2/17 | Drive-axle left PMV release |
| X2/18 | Drive-axle left wheel-speed sensor − |
| X3/1 | ABS off-road switch |
| X3/2 | Differential lock solenoid; AWD only |
| X3/3 | TCV common, steer axle |
| X3/4 | Additional-axle left PMV hold |
| X3/5 | TCV, steer axle |
| X3/6 | Additional-axle left PMV common |
| X3/7 | Additional-axle left PMV release |
| X3/8 | Stop-lamp output |
| X3/9 | Additional-axle right PMV common |
| X3/10 | Additional-axle right PMV hold |
| X3/11 | Additional-axle left wheel-speed sensor + |
| X3/12 | Additional-axle right wheel-speed sensor + |
| X3/13 | Additional-axle right PMV release |
| X3/14 | Additional-axle left wheel-speed sensor − |
| X3/15 | Additional-axle right wheel-speed sensor − |
| X4/1 | Pressure sensor common |
| X4/2 | Brake demand primary circuit signal |
| X4/3 | Load sensor signal |
| X4/4 | Pressure sensor supply |
| X4/5 | Brake demand secondary circuit signal |
| X4/6 | Trailer PMV hold |
| X4/7 | Sensor CAN low |
| X4/8 | Sensor CAN high |
| X4/9 | Trailer PMV release |
| X4/10 | Sensor CAN common |
| X4/11 | Sensor CAN supply |
| X4/12 | Trailer PMV common |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.