Page organisation in this revision
- Page type
- Technical article
- Subject
- ABS / DSC
- Parent
- Bosch ABS 8.0
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Bosch
Changes from revision 1 to revision 1
Removed text is struck through; added text is highlighted.
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ABS 8.0 programme 2.3 / Vdiag 0C, 26-way controller connector. Renault MR-372, section 38C-8. This is the ABS-only reference, not the separate 46-way ESP Vdiag 08 system. The document provides terminal numbers; do not infer a connector-face orientation from this table.
Documented terminal assignments
TerminalDocumented connection1Pump motor ground2Pump motor supply3Solenoid valve supply4Controller and solenoid ground5Front-left speed sensor signal6Rear-left speed sensor supply8Rear-right speed sensor supply9Front-right speed sensor supply10Front-right speed sensor signal11K-line diagnostic15CAN low16Front-left speed sensor supply17Rear-left speed sensor signal18Controller supply19Rear-right speed sensor signal20Brake pedal switch, closing contact23Hardwired vehicle-speed output26CAN high
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
Renault MR-372, 38C-8 (PDF p. 231)
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 1: Renault Scenic II Bosch ABS 8.0 Vdiag 0C connector pinout
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ABS 8.0 programme 2.3 / Vdiag 0C, 26-way controller connector. Renault MR-372, section 38C-8. This is the ABS-only reference, not the separate 46-way ESP Vdiag 08 system. The document provides terminal numbers; do not infer a connector-face orientation from this table.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 15 | CAN low |
| 16 | Front-left speed sensor supply |
| 17 | Rear-left speed sensor signal |
| 18 | Controller supply |
| 19 | Rear-right speed sensor signal |
| 20 | Brake pedal switch, closing contact |
| 23 | Hardwired vehicle-speed output |
| 26 | CAN high |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources
Revision 1: Renault Scenic II Bosch ABS 8.0 Vdiag 0C connector pinout
ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ABS 8.0 programme 2.3 / Vdiag 0C, 26-way controller connector. Renault MR-372, section 38C-8. This is the ABS-only reference, not the separate 46-way ESP Vdiag 08 system. The document provides terminal numbers; do not infer a connector-face orientation from this table.
Documented terminal assignments
| Terminal | Documented connection |
|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 15 | CAN low |
| 16 | Front-left speed sensor supply |
| 17 | Rear-left speed sensor signal |
| 18 | Controller supply |
| 19 | Rear-right speed sensor signal |
| 20 | Brake pedal switch, closing contact |
| 23 | Hardwired vehicle-speed output |
| 26 | CAN high |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.
Sources