ABS and traction systems · System reference
Scope and connector
Renault Scénic II X84, Bosch ABS 8.0 programme 2.3 / Vdiag 0C, 26-way controller connector. Renault MR-372, section 38C-8. This is the ABS-only reference, not the separate 46-way ESP Vdiag 08 system. The document provides terminal numbers; do not infer a connector-face orientation from this table.
Documented terminal assignments
| Terminal | Documented connection |
|---|---|
| 1 | Pump motor ground |
| 2 | Pump motor supply |
| 3 | Solenoid valve supply |
| 4 | Controller and solenoid ground |
| 5 | Front-left speed sensor signal |
| 6 | Rear-left speed sensor supply |
| 8 | Rear-right speed sensor supply |
| 9 | Front-right speed sensor supply |
| 10 | Front-right speed sensor signal |
| 11 | K-line diagnostic |
| 15 | CAN low |
| 16 | Front-left speed sensor supply |
| 17 | Rear-left speed sensor signal |
| 18 | Controller supply |
| 19 | Rear-right speed sensor signal |
| 20 | Brake pedal switch, closing contact |
| 23 | Hardwired vehicle-speed output |
| 26 | CAN high |
Only the listed assignments are included here; omission does not prove a terminal is unused. Compare the source and the exact vehicle wiring diagram before connection or testing. The source describes a specific application or controller variant, not a universal family pinout.