Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Dynamometers
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Power Test designs dynamometers and related test equipment for engine, vehicle and heavy-equipment applications. It supplies water-brake and other load systems together with data acquisition and test-cell accessories. About Power Test.

Power Test PTX complete engine dynamometer system.
Power Test PTX water-brake engine test system. Image: Power Test, used with permission.

History

Power Test dates its foundation to 1976, when John Petelinsek developed a water-brake dyno. The company expanded into engine and chassis equipment, controls and data acquisition. Its history records the acquisition of Stuska in 2002 and SuperFlow in 2017. Power Test and Taylor Dynamometer merged in 2020; the company describes Taylor as founded in 1929. These are related product histories, not interchangeable model names. Power Test history; Power Test and Taylor merger.

Representative models

  • PTX complete engine dyno: a complete engine-test package built around a W-HS water-brake load unit, formerly the 50X series. The package includes engine mounting and cooling accessories, with exact configuration to specification. PTX.
  • W-HS, W-ST and W-HT: water-brake engine-dyno families for different speed, torque and power ranges. The product index identifies W-HS as the successor to the 50X, W-ST to the 45X, and W-HT to H36. Water-brake product index.
  • DX and DS: Taylor-branded water-brake engine dynos in the same product index; the index identifies successor W-series models. Replacement and spare-part compatibility should be checked by model and serial number.
  • AC Series: electrical dyno equipment can provide both motoring and absorption when configured with a suitable drive. Regeneration and cooling depend on the installation. AC Series.

Controls and testing

The PTX listing specifies PowerNet LT data acquisition and control in its package. PowerNet EMTS is named for the X-Series electric-motor test stand, illustrating that software configurations depend on application. A controller commands load and records measurements; it does not enlarge the brake's physical torque–speed or cooling limits. PTX package; X-Series electric-motor stand.

For a used or rebuilt machine, identify the absorber, water supply and valve configuration, load cell, controller generation, sensors and cooling capacity separately. See Water and oil hydraulic dynamometer brakes.

Explore the Dynamometers section and the manufacturers and suppliers directory. Model names, control hardware and support can change; identify the exact machine and its configuration before ordering parts or comparing specifications.