Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Autronic standalone ECUs
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 3

Removed text is struck through; added text is highlighted.

Autronic SM3DC is a standalone or earlier programmable engine-management system. SM3 dual-calibration variant, identified in Autronic's software archive. Check its individual calibration-select function and firmware before installation. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Processor and applicationsAutronic has no separate SM3DC product page among the pages checked. For the base SM3, the manufacturer gives a 16-bit Intel microcontroller at 20 MHz, universal use on engines of 1 to 12 cylinders and two-rotor rotary engines, six saturating injector drivers and four ignition outputs (SM3 product page). Whether the SM3DC shares that hardware is not stated by the manufacturer in the pages checked, so those details are SM3 platform data and unverified for this variant.

Wiring and pinout

Consult the Autronic SM3 documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections. The base SM3 42-way assignment is on the Autronic SM3 connector pinout page, but is not verified for the SM3DC.Consult the Autronic SM3DC wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.

Further information

Autronic SM3DC model informationWiring, manuals or technical archiveAutronic manufacturer index

Pinout verification status

Autronic's software archive identifies SM3DC as a distinct model. Its SM3 input/output sheet is labelled SM3 and does not explicitly establish the SM3DC calibration-switch wiring or compatibility. A full SM3DC-specific pinout has not been verified; confirm the exact unit and switch arrangement with Autronic before using an SM3 schedule.SourcesAutronic SM3 product page. Manufacturer. Accessed 19 November 2026.Autronic software archive. Manufacturer. Accessed 19 November 2026.Autronic’s software archive identifies SM3DC as a distinct model. Its SM3 input/output sheet is labelled SM3 and does not explicitly establish the SM3DC calibration-switch wiring or compatibility. A full SM3DC-specific pinout has not been verified; confirm the exact unit and switch arrangement with Autronic before using an SM3 schedule.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Autronic SM3DC

Autronic SM3DC is a standalone or earlier programmable engine-management system. SM3 dual-calibration variant, identified in Autronic's software archive. Check its individual calibration-select function and firmware before installation. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Wiring and pinout

Consult the Autronic SM3DC wiring and documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections.

Further information

Pinout verification status

Autronic’s software archive identifies SM3DC as a distinct model. Its SM3 input/output sheet is labelled SM3 and does not explicitly establish the SM3DC calibration-switch wiring or compatibility. A full SM3DC-specific pinout has not been verified; confirm the exact unit and switch arrangement with Autronic before using an SM3 schedule.

Revision 3: Autronic SM3DC

Autronic SM3DC is a standalone or earlier programmable engine-management system. SM3 dual-calibration variant, identified in Autronic's software archive. Check its individual calibration-select function and firmware before installation. Model-specific information.

Identification and features

Record the ECU label, model, part number, hardware revision, firmware, configured injectors, ignition hardware and loom before comparing systems. Some outputs can be reassigned; hardware, software, current limits and engine-specific options determine what is actually available.

Processor and applications

Autronic has no separate SM3DC product page among the pages checked. For the base SM3, the manufacturer gives a 16-bit Intel microcontroller at 20 MHz, universal use on engines of 1 to 12 cylinders and two-rotor rotary engines, six saturating injector drivers and four ignition outputs (SM3 product page). Whether the SM3DC shares that hardware is not stated by the manufacturer in the pages checked, so those details are SM3 platform data and unverified for this variant.

Wiring and pinout

Consult the Autronic SM3 documentation source and identify the exact connector face, part and version. Do not apply wiring from a similarly named model. If an exact drawing is unavailable for the unit at hand, obtain it from the manufacturer or supplier before making connections. The base SM3 42-way assignment is on the Autronic SM3 connector pinout page, but is not verified for the SM3DC.

Further information

Pinout verification status

Autronic's software archive identifies SM3DC as a distinct model. Its SM3 input/output sheet is labelled SM3 and does not explicitly establish the SM3DC calibration-switch wiring or compatibility. A full SM3DC-specific pinout has not been verified; confirm the exact unit and switch arrangement with Autronic before using an SM3 schedule.

Sources