Garmin's Catalyst series is aimed at in-car driver coaching and track-session review. It combines position and vehicle-motion measurements with video to compare laps and identify driving opportunities. It is a different kind of system from an ECU or sensor-rich race engineering logger: check the particular data sources and export workflow before selecting it.
Models
Garmin Catalyst Driving Performance Optimizer
The original Catalyst uses an in-car display and a separate wired Remote Cam. It records 1080p video at 30 frames per second during a drive session. Garmin describes lap-time, segment and driving-opportunity analysis, plus real-time audible coaching. The camera needs the powered mount to record; the display's battery alone is not sufficient for a drive recording. See Garmin's Catalyst introduction, video specifications and power guidance.
Garmin Catalyst 2
The Catalyst 2 combines a 3-inch display and camera in one unit. Garmin specifies 1440p video at 30 frames per second, a 25 Hz multi-GNSS receiver, accelerometers, gyroscopes and image processing. It supplies lap timing, audio coaching and post-session comparisons. Video records to a compatible microSD card; battery operation is supported, although Garmin recommends vehicle power to avoid interruption. See the Catalyst 2 announcement and product photographs, positioning explanation, video recording specifications and power guidance.
Recorded data, video and software
Garmin's True Track Positioning combines GNSS, inertial measurement and image processing to estimate the car's track position. True Optimal Lap combines achievable segments from the driver's recorded lines; it is a coaching comparison rather than a guarantee of a future lap. The Catalyst 2 app guide describes transferring session information via Bluetooth and video via a direct Wi-Fi connection. The app allows review of lap data, graphs, video and coaching opportunities.
For the original Catalyst, Garmin says selected session data can sync to the app but session data cannot be imported or exported as CSV or VBO. Videos, including saved videos with data overlays, can be transferred separately. These statements apply to the original device in the cited support articles; check the current Catalyst 2 app and documentation before assuming the same export limitations for that model. Sources: original Catalyst session data and video transfer.
ECU data and remote telemetry
Garmin states that the original Catalyst does not retrieve OBD-II vehicle data. Do not assume either Catalyst model provides configurable ECU CAN logging, external engineering sensor inputs or a live pit-wall telemetry service from its wireless connection: verify the exact model and current Garmin documentation if those functions are required. Bluetooth or Wi-Fi used for audio and transferring sessions is not evidence of live remote monitoring. See Garmin's OBD-II support answer and the Catalyst 2 app guide.
Installation and use
Follow Garmin's mounting, alignment, camera, memory-card and power instructions and the organiser's vehicle rules. Do not operate or review sessions while driving. Garmin describes these as closed-circuit driving products; check the track type and the installed software's features. Catalyst 2 software updates can change supported functions; Garmin's release notes record drag-race session support added in version 3.20.
For broader equipment types see In-car datalogging and telematics and In-car live telemetry and telematics. Product photographs on the linked Garmin pages are credited to Garmin.