In-car telemetry sends selected vehicle data to someone away from the car while the session is taking place. A datalogger records samples for later analysis; a telemetry system adds a communications path and a receiving service or application. Some systems do both. Live reporting may show lap time, GPS position, speed, ECU channels and configured warnings, but only if the equipment, data source and network support them.
How the information reaches the pit or engineer
- Sensors, GPS and an ECU or vehicle network feed the logger or telemetry unit.
- The unit selects and sends channels through a supported radio or internet connection. A mobile-network system needs coverage, an appropriate data service and its remote platform; a Wi-Fi-connected system needs a working route to the internet.
- The receiving application presents dashboards, tracks, alarms or data for analysis. Local recording and buffered upload can preserve some data during an interruption, depending on the device and configuration; they do not make an interrupted live feed continuous.
Acquisition rate, stored-data rate and live update rate are different limits. A fast sensor sampled locally may be sent or displayed less frequently because of configuration or network conditions. Compare the actual channel list, bandwidth, latency, loss behaviour and recording provision rather than assuming the live display is a complete copy of the high-rate log.
Race Technology RT LIVE Motorsport
RT LIVE Motorsport combines vehicle data logging, mobile-network upload and live telemetry. The manufacturer lists lap times, position, speed, ECU information and alarms as examples; the available channels depend on connected equipment. Data can be viewed through a web browser or PC software. The product page also includes manufacturer product photographs.
The unit can operate with power and GPS/mobile antennas, or connect to supported Race Technology equipment, CAN sources and sensors. Race Technology says it buffers data locally when mobile data is unavailable and uploads when service returns. Its page describes a user-accessible data SIM, account registration and ongoing cloud service charges: confirm the current contract, coverage, licence and network compatibility for the intended region. The manufacturer quotes browser updates at 5 Hz and PC telemetry up to 100 Hz subject to connection conditions; these are not a guaranteed rate for every channel or location. Sources: RT LIVE Motorsport product information and specification.
Race Technology lists an optional AiM decoder cable for certain named AiM units; a CAN licence is also required. The same source says messaging back to an AiM display is not supported by that interface. Check the listed device and generation rather than assuming every AiM logger is compatible.
Autosport Labs RaceCapture and Podium
RaceCapture/Track MK4 can stream to the Podium service over a configured 2.4 GHz Wi-Fi hotspot. The RaceCapture app configures the device and provides local dashboard viewing; the Podium app or website can show remote live telemetry and previously recorded sessions. A device streaming key and working internet connection are part of the setup. Its guide describes local logging as well as live streaming: confirm storage and buffering behaviour for the exact hardware and firmware.
Autosport Labs also offers RaceCapture/Pro MK4 with an optional onboard 4G LTE telemetry module for direct streaming to Podium. Network support, SIM/data plan, software and service terms need checking for the country and unit. The RaceCapture/Track product page contains manufacturer product images; confirm the generation shown before using it to identify a unit.
MoTeC T2
MoTeC T2 is a telemetry server and software system used with eligible MoTeC loggers or display loggers and a T2 upgrade. MoTeC describes viewing live data in i2 Pro, multiple vehicles, live track mapping and independently selected channel transmit rates. The server software alone is not an in-car radio or cellular link: check the supported logger, upgrade, analysis software and transmit/receive hardware required for the installation. The linked product page includes MoTeC's product image.
Practical checks before an event
- Verify the championship rules and permissions for live data, radio equipment and pit-to-car messages. Access to a channel may be limited by an organiser.
- Confirm the chosen ECU protocol and required sensors supply the needed channels and units. Set warning thresholds from the vehicle's actual operating requirements, then test them.
- Test GPS reception, antenna positions, network coverage around the whole circuit, account access and data-plan allowance. Check battery supply, secure mounting and harness routing against the manufacturer instructions.
- Perform a short test with a second person watching the remote dashboard. Compare live readings and timestamps with the recorded session, check for gaps, and establish how and when buffered data appears after a dropout.
- Decide who may see location and vehicle data and how long it should be retained. Protect account credentials and review the provider's current access and retention controls.
Sources: Manufacturer product pages, specifications and setup guides linked above. Features and service terms can change; check the exact hardware, software version and regional network support. Product photographs on the linked pages are credited to their respective manufacturers.