Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Gearboxes
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Easy-R is used for electronically automated manual transmissions in Renault and Dacia applications. Dacia's 2015 Netherlands announcement describes an electromechanically actuated five-speed system for specific Logan MCV and Sandero TCe 90 versions, with automatic and manually requested shifts. Renault's Kwid launch document describes a different market example using an R/N/D rotary selector. These sources do not prove identical actuators, electronic architecture, calibration or diagnostic values across all Easy-R vehicles.

Confirm the fitted transmission

Identify vehicle, year, country, engine, gearbox, controller and software, and distinguish Easy-R from a manual, continuously variable transmission or other automatic. The Dacia announcement describes electromechanical clutch and gear actuation in its stated example; the older Clio II Quickshift JH1 example uses electrohydraulic actuation. Do not transfer hydraulic pump, accumulator or pressure figures between them simply because both automate a manual transmission.

What a clutch warning can mean

Renault Brazil's 2016 Sandero Easy-R quick guide describes an automated clutch and gearbox, creep in the stated conditions and a clutch-temperature warning; at a critical temperature it says the vehicle may be immobilised for a cooling period. The same guide says it supplements, not replaces, the owner's manual. This is a Brazilian Sandero example, not a universal dashboard-light definition or precise temperature threshold for European Dacia or other markets.

Record the actual indication, gear, operating conditions, slope, stop-start traffic, temperature and previous work. Avoid prolonged clutch slip to hold the vehicle on an incline and use the exact vehicle's handbook for stopping, parking and recovery. A warning or rough take-up does not by itself establish clutch-disc wear, a failed actuator or the availability of an adaptation fix.

Diagnostic evidence

  1. Save transmission, engine and other related control-unit codes, status and freeze-frame data with the correct tool before clearing memory. Record the precise complaint: no start, refused forward or reverse, shift interruption, unexpected neutral, slip, judder or a heat warning.
  2. Compare selector and brake requests with the controller's reported states, requested and actual gear, clutch/shift actuation and available engine and transmission speeds. Verify diagnostic channel names, units and test conditions for that control unit.
  3. Follow the appropriate fault-specific test for supply and grounds, connectors and wiring, actuator and position feedback, clutch and release mechanism and gearbox mechanics. Low battery voltage, an implausible sensor, a real clutch problem and a rejected interlock can produce similar driver-visible symptoms; no single suggestion identifies the fault.
  4. Where a repair requires setup, adaptation or coding, use current Renault/Dacia procedures and equipment for the exact vehicle and component. Capture pre-repair values and do not use a reset to disguise an unresolved electrical or mechanical fault. Active tests can move components.

Limits of the sources

The Renault Group public documents above describe operation and application examples, not detailed fault thresholds or diagnostic trouble-code definitions. Use the current model-specific guided diagnostics for any code, measured-value limit, fluid or adaptation procedure. Do not interpret the 2015 Dacia press announcement or the Brazilian Sandero leaflet as service instructions for a different Easy-R version.

Related: electronic automated-manual gearbox guide and automated manual clutch and gearshift control.