Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Diagnostics
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Chevrolet, GMC

An L5P Duramax owner described a part-throttle stumble after changing turbo hardware. HP Tuners logs appeared to show actual rail pressure following the requested value, while misfires and torque-converter slip were also discussed. A forum participant identified a suspected MAF signal problem after reviewing the log; the owner later reported that a replacement MAF resolved the symptom. The truck's exact model year and the raw log were not independently verified. L5P owner discussion and follow-up.

Use the log to separate possibilities

At the point of a repeatable symptom, compare the available MAF signal with engine speed, driver demand/load and requested versus actual rail pressure; review recorded DTCs and the time trace rather than only average values. Inspect the intake, sensor and connections using the appropriate service information. A rail-pressure trace that looks normal does not prove the airflow signal is healthy. Conversely, this one owner-reported repair does not establish that every L5P stumble is a MAF fault. Assess any transmission-slip indication separately.

Injector circuit evidence is separate

GM bulletin 23-NA-027 covers specified 2017–23 Silverado/Sierra 2500HD and 3500HD L5P applications and describes injector-connector terminal wear associated with applicable misfire or injector-circuit codes. GM's PIP5582 describes grouped injector-driver behaviour for specified 2017–18 L5P trucks. Use the actual vehicle's VIN, market and current service information to check applicability. Multiple cylinder indications should be investigated at the circuit and driver level, not assumed to be simultaneous failed injectors.

Preserve diagnostic information and confirm sensor readings before making calibration changes or replacing parts. HP Tuners' Scanner configuration guidance explains how to select vehicle-specific channels. Tuning support and E41 service requirements vary by application; see the tool listing.