Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Delphi diesel
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 6

Removed text is struck through; added text is highlighted.

CRD beside DCM 3.5

CRD is the name on a group of Delphi diesel files and on the Alientech coverage string DCM3.5 - CRD2. Delphi's 2007 generation table does not use the letters CRD. It does put generation 3.5 on the DaimlerChrysler OM651 with solenoid injectors, and generation 4.1 on the OM651 with piezo injectors. Alientech groups the name DCM3.5 - CRD2 in its coverage list. The manual identifies a solenoid OM651 example for generation 3.5, but the coverage list alone does not establish the injector type on every listed vehicle. Confirm the actual configuration.

The former tool page listed a Mercedes-Benz Sprinter 316 CDI of 2009, 120 kW, a Jeep Compass 2.2 CRD of 2011 and of 2014 at 100 kW and at 120 kW, and a Jeep Patriot 2.2 CRD with a particulate filter, 2011, 120 kW. A file catalogue of units it calls Delphi CRD2 is dominated by Mercedes-Benz, with software numbers beginning 65190, and by the Jeep Compass 2.2. One hardware number in that catalogue, 0104482140, carries 14 software versions. The hardware number does not select the file.ProcessorThe AutoTuner ECU compatibility list of 28 October 2026 (tool compatibility listing) gives the microcontroller of both CRD2 and DCM3.5 as the MPC5566 (Freescale/NXP, PowerPC e200). That agrees with the grouping of the two names above. The listing does not state the flash or EEPROM device, and it is a tool vendor's statement, not a Delphi document. The later CRD3 family is listed with TC1797 and TC1793 microcontrollers; see Delphi CRD3 and CRD3P.The rows on that tool page are a Mercedes-Benz Sprinter 316 CDI of 2009, 120 kW, a Jeep Compass 2.2 CRD of 2011 and of 2014 at 100 kW and at 120 kW, and a Jeep Patriot 2.2 CRD with a particulate filter, 2011, 120 kW. A file catalogue of units it calls Delphi CRD2 is dominated by Mercedes-Benz, with software numbers beginning 65190, and by the Jeep Compass 2.2. One hardware number in that catalogue, 0104482140, carries 14 software versions. The hardware number does not select the file.

What does not transfer

Generation 4.1 is the piezo OM651 in the same Delphi table. The manual distinguishes solenoid and piezo OM651 configurations; do not assume a file for one configuration is suitable for the other. A repairer's DCM 3.5 list for the Peugeot, Citroën and Ford 1.4 and 1.6 diesels is a different assignment of the number 3.5, set out on Delphi DCM. The Compass rows do not make every Jeep diesel a CRD2, and the Sprinter row does not make every OM651 a Delphi. Bosch also supplied Mercedes diesels. Read the controller.

Injector correction on systems covered by Delphi's 2007 manual uses C2I or C3I, described on Delphi diesel. It is stored for the cylinder. It is not the calibration of the CRD file.

For later named types and examples, see Delphi CRD3 and CRD3P.

Bench connection pinoutBench-connection pins for this unit are drawn in Delphi CRD bench connection pinout.

Sources

Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007. Generation 3.5 as the solenoid OM651, generation 4.1 as the piezo OM651. Mirror: DDGX200. Accessed 2026-11-13. Alientech, historical ECU version DCM3.5 - CRD2 listing: the previously consulted page is no longer available. A separate Alientech K-Suite 2.32 list: Jeep Compass and Jeep Patriot (PDF, 20 MB) show DCM3.5 - CRD2 examples; its rows do not establish every detail of the former listing. OriginalECU, Delphi CRD2 file index. Mercedes-Benz and Jeep Compass, hardware 0104482140 carrying 14 software versions, software numbers beginning 65190. CRD2 index. Accessed 2026-11-13. AutoTuner, ECU compatibility list (PDF export, 28 October 2026): CRD2 and DCM3.5 with MPC5566. Accessed 19 November 2026.Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007. Generation 3.5 as the solenoid OM651, generation 4.1 as the piezo OM651. Mirror: DDGX200. Accessed 2026-11-13. Alientech, ECU version DCM3.5 - CRD2. Sprinter 316 CDI, Jeep Compass 2.2 CRD and Jeep Patriot 2.2 CRD. DCM3.5 - CRD2. Accessed 2026-11-13. OriginalECU, Delphi CRD2 file index. Mercedes-Benz and Jeep Compass, hardware 0104482140 carrying 14 software versions, software numbers beginning 65190. CRD2 index. Accessed 2026-11-13.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Delphi CRD

CRD beside DCM 3.5

CRD is the name on a group of Delphi diesel files and on the Alientech coverage string DCM3.5 - CRD2. Delphi's 2007 generation table does not use the letters CRD. It does put generation 3.5 on the DaimlerChrysler OM651 with solenoid injectors, and generation 4.1 on the OM651 with piezo injectors. Alientech groups the name DCM3.5 - CRD2 in its coverage list. The manual identifies a solenoid OM651 example for generation 3.5, but the coverage list alone does not establish the injector type on every listed vehicle. Confirm the actual configuration.

The rows on that tool page are a Mercedes-Benz Sprinter 316 CDI of 2009, 120 kW, a Jeep Compass 2.2 CRD of 2011 and of 2014 at 100 kW and at 120 kW, and a Jeep Patriot 2.2 CRD with a particulate filter, 2011, 120 kW. A file catalogue of units it calls Delphi CRD2 is dominated by Mercedes-Benz, with software numbers beginning 65190, and by the Jeep Compass 2.2. One hardware number in that catalogue, 0104482140, carries 14 software versions. The hardware number does not select the file.

What does not transfer

Generation 4.1 is the piezo OM651 in the same Delphi table. The manual distinguishes solenoid and piezo OM651 configurations; do not assume a file for one configuration is suitable for the other. A repairer's DCM 3.5 list for the Peugeot, Citroën and Ford 1.4 and 1.6 diesels is a different assignment of the number 3.5, set out on Delphi DCM. The Compass rows do not make every Jeep diesel a CRD2, and the Sprinter row does not make every OM651 a Delphi. Bosch also supplied Mercedes diesels. Read the controller.

Injector correction on systems covered by Delphi's 2007 manual uses C2I or C3I, described on Delphi diesel. It is stored for the cylinder. It is not the calibration of the CRD file.

For later named types and examples, see Delphi CRD3 and CRD3P.

Sources

  • Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007. Generation 3.5 as the solenoid OM651, generation 4.1 as the piezo OM651. Mirror: DDGX200. Accessed 2026-11-13.
  • Alientech, ECU version DCM3.5 - CRD2. Sprinter 316 CDI, Jeep Compass 2.2 CRD and Jeep Patriot 2.2 CRD. DCM3.5 - CRD2. Accessed 2026-11-13.
  • OriginalECU, Delphi CRD2 file index. Mercedes-Benz and Jeep Compass, hardware 0104482140 carrying 14 software versions, software numbers beginning 65190. CRD2 index. Accessed 2026-11-13.
Revision 6: Delphi CRD

CRD beside DCM 3.5

CRD is the name on a group of Delphi diesel files and on the Alientech coverage string DCM3.5 - CRD2. Delphi's 2007 generation table does not use the letters CRD. It does put generation 3.5 on the DaimlerChrysler OM651 with solenoid injectors, and generation 4.1 on the OM651 with piezo injectors. Alientech groups the name DCM3.5 - CRD2 in its coverage list. The manual identifies a solenoid OM651 example for generation 3.5, but the coverage list alone does not establish the injector type on every listed vehicle. Confirm the actual configuration.

The former tool page listed a Mercedes-Benz Sprinter 316 CDI of 2009, 120 kW, a Jeep Compass 2.2 CRD of 2011 and of 2014 at 100 kW and at 120 kW, and a Jeep Patriot 2.2 CRD with a particulate filter, 2011, 120 kW. A file catalogue of units it calls Delphi CRD2 is dominated by Mercedes-Benz, with software numbers beginning 65190, and by the Jeep Compass 2.2. One hardware number in that catalogue, 0104482140, carries 14 software versions. The hardware number does not select the file.

Processor

The AutoTuner ECU compatibility list of 28 October 2026 (tool compatibility listing) gives the microcontroller of both CRD2 and DCM3.5 as the MPC5566 (Freescale/NXP, PowerPC e200). That agrees with the grouping of the two names above. The listing does not state the flash or EEPROM device, and it is a tool vendor's statement, not a Delphi document. The later CRD3 family is listed with TC1797 and TC1793 microcontrollers; see Delphi CRD3 and CRD3P.

What does not transfer

Generation 4.1 is the piezo OM651 in the same Delphi table. The manual distinguishes solenoid and piezo OM651 configurations; do not assume a file for one configuration is suitable for the other. A repairer's DCM 3.5 list for the Peugeot, Citroën and Ford 1.4 and 1.6 diesels is a different assignment of the number 3.5, set out on Delphi DCM. The Compass rows do not make every Jeep diesel a CRD2, and the Sprinter row does not make every OM651 a Delphi. Bosch also supplied Mercedes diesels. Read the controller.

Injector correction on systems covered by Delphi's 2007 manual uses C2I or C3I, described on Delphi diesel. It is stored for the cylinder. It is not the calibration of the CRD file.

For later named types and examples, see Delphi CRD3 and CRD3P.

Bench connection pinout

Bench-connection pins for this unit are drawn in Delphi CRD bench connection pinout.

Sources

  • Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007. Generation 3.5 as the solenoid OM651, generation 4.1 as the piezo OM651. Mirror: DDGX200. Accessed 2026-11-13.
  • Alientech, historical ECU version DCM3.5 - CRD2 listing: the previously consulted page is no longer available. A separate Alientech K-Suite 2.32 list: Jeep Compass and Jeep Patriot (PDF, 20 MB) show DCM3.5 - CRD2 examples; its rows do not establish every detail of the former listing.
  • OriginalECU, Delphi CRD2 file index. Mercedes-Benz and Jeep Compass, hardware 0104482140 carrying 14 software versions, software numbers beginning 65190. CRD2 index. Accessed 2026-11-13.
  • AutoTuner, ECU compatibility list (PDF export, 28 October 2026): CRD2 and DCM3.5 with MPC5566. Accessed 19 November 2026.