Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

CRD3 and CRD3P are names used for Delphi diesel controllers in tool suppliers' coverage lists. They encompass multiple distinct suffixes. The exact type, hardware and software identification matter: a shared prefix does not establish that two units, files or procedures are interchangeable. Earlier CRD2 coverage is listed separately.

Examples in published tool coverage

Alientech's 2021 K-TAG release identifies the following diesel applications. These are examples of the vendor's coverage, not a complete fitment catalogue; model, engine, market and production changes can alter the ECU fitted.

Type as listedExample in Alientech's list
CRD3P.C0Mercedes-Benz Sprinter 316 CDI, 120 kW
CRD3P.D1Mercedes-Benz C-Class 220 BlueTEC, 125 kW, 6MT or 7AT
CRD3.E1Mercedes-Benz A-Class 200 D, 100 kW, including 6MT and 7AT
CRD3.N5Infiniti Q50 2.2d, 125 kW, 6MT or 7AT
CRD3.50Mercedes-Benz C-Class 220 BlueTEC, 125 kW, 6MT or 7AT

The two C-Class examples illustrate why the vehicle description alone does not settle the exact ECU. Read the actual identification and confirm compatibility using applicable manufacturer information and the tool's current vehicle list.

Processor and access distinctions

AutoTuner's published list names CRD3P.C0 and CRD3P.D1 with TC1793, and CRD3.50 and CRD3.N5 with TC1797. These are pairings in that tool's list, not proof of the processor in every unit carrying a similar name. Do not infer the full suffix or a compatible file from the processor alone.

Alientech's 2021 release describes K-TAG service-mode reading and writing for the named applications without opening the ECU. That is a tool- and release-specific statement, not a guarantee for other tools, software versions or every CRD3. Check the exact unit, available functions, access method and recovery provisions in current tool documentation before programming. Preserve identification and vehicle configuration details, and follow the vehicle manufacturer's replacement and injector coding procedure where applicable.

Sources