Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Injectors
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch

Changes from revision 5 to revision 5

Removed text is struck through; added text is highlighted.

Injector catalogue › Diesel injector catalogue | Diesel testing | Test equipment

Application examples are identification leads for selected variants; a model or engine name alone does not establish fitment. Match the complete injector and vehicle OE numbers, suffix, engine code, year, emissions level, calibration and current supersessions. Entries grouped by a source do not establish that every number fits every vehicle in the group or that the numbers are interchangeable.

Diesel delivery is meaningful only with the matching injector, bench, fluid, temperature, rail pressure, drive waveform, pulse and counting conditions. Where a complete acceptance plan is not published here, use the current authorised plan for the actual injector and bench.

Bosch common-rail injector from a Deutz 7.2-litre diesel used in Volvo FE/FL; example only, not a photograph of a numbered entry. Photo: Panoha / Wikimedia Commons, CC BY-SA 3.0; cropped by a Commons contributor.

Bosch diesel common-rail injector cutaway, shown for construction rather than part identification. Photo L.Kenzel; background removed by Chris828, image resized. Wikimedia Commons source; CC BY-SA 3.0.

Bosch new and exchange numbers

New Bosch numbers, exchange references, Bosch CRI classifications and broad application examples below are from the Bosch Autospec exchange-injector article (2014). The exchange number is a catalogue cross-reference, not the number stamped on every new injector. Photos at supplier links may show a representative product.

Individual solenoid OE lookups are from the Bosch-number cross-reference list. Piezo references come from FIRAD’s September 2024 catalogue, which sometimes groups several injector and OE numbers under one service family; those groups are marked below and do not prove direct interchange.

New part number; alternate spacingBosch typeBosch BX exchange numberApplication group / illustration04451101890 445 110 1890445 110 189CRI 10986435055Mercedes Sprinter; OM611/OM612 2.1–2.7OE Mercedes A6110701687. Example: Sprinter 311 CDI 2.2, OM611.981, 2002–06 (application / photo).04451100590 445 110 0590445 110 059CRI 10986435149Chrysler Voyager / Jeep Cherokee 2.5–2.8OE Chrysler 05066820AA.04451102160 445 110 2160445 110 216CRI 20986435091BMW 2.0 / 3.0 diesel group; supplier photoOE BMW 13537793836 / 13537794334.04451101830 445 110 1830445 110 183CRI 20986435102Fiat 500 / Grande Punto, Ford Ka, Vauxhall 1.3 diesel groupOE Fiat 55197875; Ford 1538758; Opel / Vauxhall 93183910.04451102010 445 110 2010445 110 201CRI 10986435063Mercedes Vito, OM611 2.2 / OM612 2.7 groupOE Mercedes A6130700887. Example: E 320 CDI W210, 145 kW, 1999–2002 (application listing).04451101310 445 110 1310445 110 131CRI 20986435084BMW 3.0 diesel groupOE BMW 13537789661 / 13537789670 / 13537787187.04451101460 445 110 1460445 110 146CRI 10986435007Renault 1.9 dCi group, including Laguna / TraficOE Renault 8200238528.04451100110 445 110 0110445 110 011CRI 10986435004Mercedes OM611; selected C/E-Class and VitoOE Mercedes A6110700587.04451150780 445 115 0780445 115 078CRI 3 piezo0986435358Audi 3.0 TDI groupFIRAD service group lists VW / Audi 059130277AB / AA / AH / BD for this and other numbers; verify the exact suffix and supersession.04451150280 445 115 0280445 115 028CRI 3 piezo0986435352VW Crafter 2.5 TDI groupOE VW 076130277. Example: Crafter 2.5 TDI BJJ, selected variants (application / photo); additional listed engine codes.04451150630 445 115 0630445 115 063CRI 3 piezo0986435355Mercedes OM642 3.0 and selected Chrysler / JeepFIRAD service group lists Mercedes A6420700587 / A6420701387 and Jeep / Chrysler 68028405AA.04451150680 445 115 0680445 115 068CRI 3 piezo0986435356Mercedes Sprinter / Vito OM646 2.1OE Mercedes A6460701487, listed in FIRAD’s service group.04451150070 445 115 0070445 115 007CRI 3 piezo0986435350Renault / Vauxhall 2.0 dCi groupOE Renault 8200340068 / 166003429R; Opel / Vauxhall 93161695, listed in FIRAD’s service group; Renault Espace / Laguna / Koleos 2.0 dCi.04451150700 445 115 0700445 115 070CRI 3 piezo0986435354BMW 3.0 diesel groupFIRAD service group lists BMW 13537807208. Example: BMW 330d E90 3.0, 170 kW, 2005–08 (application listing).04451160240 445 116 0240445 116 024CRI 3 piezo0986435394BMW 2.0 / 3.0 diesel groupFIRAD lists BMW 13537805429 / 13537805428. Example: BMW 320d xDrive E90 2.0, N47D20C, 120–130 kW, 2008–10 (application listing).04451150610 445 115 0610445 115 061CRI 3 piezo0986435398Mercedes Sprinter OM642 3.0 groupOE Mercedes 6420701587 listed in the Flight Diesel service group. Example: Sprinter 319 / 519 CDI, OM642.992 V6 (ATS parts catalogue); confirm the exact vehicle and supersession.04451150670 445 115 0670445 115 067CRI 3 piezo0986435402Chrysler / Dodge / Jeep 2.8 diesel groupOE Chrysler / Dodge / Jeep 68042029AA; Chrysler KRX042029AA. Example: Grand Voyager V 2.8 CRD ENS, 120 kW, from 10/2007 (vehicle details and supplier photo).

0445110107 / 0 445 110 107 / 0445 110 107: the Hartridge tooling bulletin places this number in a Mercedes CDI application group. The number cross-reference lists Mercedes A6110701487. A separate 2018 spray-research paper identifies a Bosch 0445110107 as a six-hole injector with 0.18 mm holes and 156° included angle. The laboratory reports 300 and 500 bar spray tests, a 12 mg injection quantity and fuel temperature of 21.5 °C, using diesel and butanol/diesel blends. These are research conditions, not a workshop delivery acceptance plan; the paper does not give the complete service-test drive parameters.

Additional identification

0445110044 / 0 445 110 044: the Bosch-number cross-reference lists PSA 198071 / 96375360 and Suzuki 15310-67G12. The Turbo Next catalogue places this number in the 2.0 HDi / JTD family, including Citroën Berlingo, Xsara and Peugeot 206 / 306 / 406 / Expert / Partner applications from 1999 onward; verify the exact engine and OE suffix. The photograph below shows this number at right.

0445110259 / 0 445 110 259: supplier lists a 1.6 HDi / TDCi application group and nozzle DLLA149P1515. The cross-reference list gives PSA 1980J3 and Ford 5M5Q-9F593-AA / 1425514. Part and product photograph. Verify the complete number; the nozzle code is not a substitute for the full injector.

0445110002, 0445110068 and 0445110119 (0 445 110 002 / 068 / 119): Hartridge TIB195/11 groups them with Alfa Romeo 145/146/156/166 and Fiat / Lancia 1.9 or 2.4 JTD applications. The bulletin groups applications; confirm each vehicle by its OE number. The individual cross-reference list gives Fiat 46472233 / 46462971 for 0445110002; Fiat 46787376 for 0445110068; and Fiat 55192948 / 55187291 for 0445110119.

Bosch 0445110259 and 0445110044: photographed research injectors

Bosch 0445110259 (left) and 0445110044 (right). Sergey Belchev, Zdravko Ivanov, Trifon Uzuntonev and Veselin Mihaylov, “Determination of the stages of the injection process for Common Rail injectors using vibration pulses”, IOP Conference Series: Materials Science and Engineering 977 (2020) 012023, figure 2; DOI: 10.1088/1757-899X/977/1/012023; extracted without changes, CC BY 3.0.

In this study, table 2, a CRI-NTR816E bench and accelerometers were used to estimate the delay between the start of the electrical command and needle lift. Three recordings were averaged for each point. These are measured timing examples, not delivery quantities or acceptance limits; the published description is insufficient to recreate a complete workshop test plan.

PartRail pressureCommand pulseMean start delay044511025925 MPa (250 bar)900 µs292 µs044511025980 MPa (800 bar)900 µs266 µs0445110259135 MPa (1,350 bar)900 µs248 µs044511004425 MPa (250 bar)900 µs272 µs044511004480 MPa (800 bar)900 µs232 µs0445110044135 MPa (1,350 bar)900 µs236 µs

Part-specific fixture information

For the listed Mercedes family including 0445110011 and 0445110189, Hartridge's 2011 AVM2-PC HK900 / CRi-PC bulletin lists nosepiece HK907 (NTA5101), backleak adaptor HK909 (NTA5301), clamp HK912 (NTA5601), pipe AHP5065 and cable HK902. For the Renault 1.9 dCi group including 0445110146, the clamp is HK969 (NTA5631); the listed nosepiece, backleak adaptor, pipe and cable are HK907, HK909, AHP5065 and HK902. This is historical tooling information, not a delivery limit; check the current equipment documentation and exact number. Source: Hartridge TIB195/11, issue 18.

No complete authoritative delivery/return acceptance values are published in the sources above. Use the applicable Bosch or approved bench test plan for the exact number, including its piezo/solenoid driver and all test points.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 5: Bosch common-rail diesel injector part numbers

Injector catalogue › Diesel injector catalogue | Diesel testing | Test equipment

Application examples are identification leads for selected variants; a model or engine name alone does not establish fitment. Match the complete injector and vehicle OE numbers, suffix, engine code, year, emissions level, calibration and current supersessions. Entries grouped by a source do not establish that every number fits every vehicle in the group or that the numbers are interchangeable.

Diesel delivery is meaningful only with the matching injector, bench, fluid, temperature, rail pressure, drive waveform, pulse and counting conditions. Where a complete acceptance plan is not published here, use the current authorised plan for the actual injector and bench.

Example Bosch common-rail diesel injector
Bosch common-rail injector from a Deutz 7.2-litre diesel used in Volvo FE/FL; example only, not a photograph of a numbered entry. Photo: Panoha / Wikimedia Commons, CC BY-SA 3.0; cropped by a Commons contributor.
Cutaway of an electronically controlled Bosch diesel common-rail injector
Bosch diesel common-rail injector cutaway, shown for construction rather than part identification. Photo L.Kenzel; background removed by Chris828, image resized. Wikimedia Commons source; CC BY-SA 3.0.

Bosch new and exchange numbers

New Bosch numbers, exchange references, Bosch CRI classifications and broad application examples below are from the Bosch Autospec exchange-injector article (2014). The exchange number is a catalogue cross-reference, not the number stamped on every new injector. Photos at supplier links may show a representative product.

Individual solenoid OE lookups are from the Bosch-number cross-reference list. Piezo references come from FIRAD’s September 2024 catalogue, which sometimes groups several injector and OE numbers under one service family; those groups are marked below and do not prove direct interchange.

New part number; alternate spacingBosch typeBosch BX exchange numberApplication group / illustration
0445110189
0 445 110 189
0445 110 189
CRI 10986435055Mercedes Sprinter; OM611/OM612 2.1–2.7
OE Mercedes A6110701687. Example: Sprinter 311 CDI 2.2, OM611.981, 2002–06 (application / photo).
0445110059
0 445 110 059
0445 110 059
CRI 10986435149Chrysler Voyager / Jeep Cherokee 2.5–2.8
OE Chrysler 05066820AA.
0445110216
0 445 110 216
0445 110 216
CRI 20986435091BMW 2.0 / 3.0 diesel group; supplier photo
OE BMW 13537793836 / 13537794334.
0445110183
0 445 110 183
0445 110 183
CRI 20986435102Fiat 500 / Grande Punto, Ford Ka, Vauxhall 1.3 diesel group
OE Fiat 55197875; Ford 1538758; Opel / Vauxhall 93183910.
0445110201
0 445 110 201
0445 110 201
CRI 10986435063Mercedes Vito, OM611 2.2 / OM612 2.7 group
OE Mercedes A6130700887. Example: E 320 CDI W210, 145 kW, 1999–2002 (application listing).
0445110131
0 445 110 131
0445 110 131
CRI 20986435084BMW 3.0 diesel group
OE BMW 13537789661 / 13537789670 / 13537787187.
0445110146
0 445 110 146
0445 110 146
CRI 10986435007Renault 1.9 dCi group, including Laguna / Trafic
OE Renault 8200238528.
0445110011
0 445 110 011
0445 110 011
CRI 10986435004Mercedes OM611; selected C/E-Class and Vito
OE Mercedes A6110700587.
0445115078
0 445 115 078
0445 115 078
CRI 3 piezo0986435358Audi 3.0 TDI group
FIRAD service group lists VW / Audi 059130277AB / AA / AH / BD for this and other numbers; verify the exact suffix and supersession.
0445115028
0 445 115 028
0445 115 028
CRI 3 piezo0986435352VW Crafter 2.5 TDI group
OE VW 076130277. Example: Crafter 2.5 TDI BJJ, selected variants (application / photo); additional listed engine codes.
0445115063
0 445 115 063
0445 115 063
CRI 3 piezo0986435355Mercedes OM642 3.0 and selected Chrysler / Jeep
FIRAD service group lists Mercedes A6420700587 / A6420701387 and Jeep / Chrysler 68028405AA.
0445115068
0 445 115 068
0445 115 068
CRI 3 piezo0986435356Mercedes Sprinter / Vito OM646 2.1
OE Mercedes A6460701487, listed in FIRAD’s service group.
0445115007
0 445 115 007
0445 115 007
CRI 3 piezo0986435350Renault / Vauxhall 2.0 dCi group
OE Renault 8200340068 / 166003429R; Opel / Vauxhall 93161695, listed in FIRAD’s service group; Renault Espace / Laguna / Koleos 2.0 dCi.
0445115070
0 445 115 070
0445 115 070
CRI 3 piezo0986435354BMW 3.0 diesel group
FIRAD service group lists BMW 13537807208. Example: BMW 330d E90 3.0, 170 kW, 2005–08 (application listing).
0445116024
0 445 116 024
0445 116 024
CRI 3 piezo0986435394BMW 2.0 / 3.0 diesel group
FIRAD lists BMW 13537805429 / 13537805428. Example: BMW 320d xDrive E90 2.0, N47D20C, 120–130 kW, 2008–10 (application listing).
0445115061
0 445 115 061
0445 115 061
CRI 3 piezo0986435398Mercedes Sprinter OM642 3.0 group
OE Mercedes 6420701587 listed in the Flight Diesel service group. Example: Sprinter 319 / 519 CDI, OM642.992 V6 (ATS parts catalogue); confirm the exact vehicle and supersession.
0445115067
0 445 115 067
0445 115 067
CRI 3 piezo0986435402Chrysler / Dodge / Jeep 2.8 diesel group
OE Chrysler / Dodge / Jeep 68042029AA; Chrysler KRX042029AA. Example: Grand Voyager V 2.8 CRD ENS, 120 kW, from 10/2007 (vehicle details and supplier photo).

0445110107 / 0 445 110 107 / 0445 110 107: the Hartridge tooling bulletin places this number in a Mercedes CDI application group. The number cross-reference lists Mercedes A6110701487. A separate 2018 spray-research paper identifies a Bosch 0445110107 as a six-hole injector with 0.18 mm holes and 156° included angle. The laboratory reports 300 and 500 bar spray tests, a 12 mg injection quantity and fuel temperature of 21.5 °C, using diesel and butanol/diesel blends. These are research conditions, not a workshop delivery acceptance plan; the paper does not give the complete service-test drive parameters.

Additional identification

0445110044 / 0 445 110 044: the Bosch-number cross-reference lists PSA 198071 / 96375360 and Suzuki 15310-67G12. The Turbo Next catalogue places this number in the 2.0 HDi / JTD family, including Citroën Berlingo, Xsara and Peugeot 206 / 306 / 406 / Expert / Partner applications from 1999 onward; verify the exact engine and OE suffix. The photograph below shows this number at right.

0445110259 / 0 445 110 259: supplier lists a 1.6 HDi / TDCi application group and nozzle DLLA149P1515. The cross-reference list gives PSA 1980J3 and Ford 5M5Q-9F593-AA / 1425514. Part and product photograph. Verify the complete number; the nozzle code is not a substitute for the full injector.

0445110002, 0445110068 and 0445110119 (0 445 110 002 / 068 / 119): Hartridge TIB195/11 groups them with Alfa Romeo 145/146/156/166 and Fiat / Lancia 1.9 or 2.4 JTD applications. The bulletin groups applications; confirm each vehicle by its OE number. The individual cross-reference list gives Fiat 46472233 / 46462971 for 0445110002; Fiat 46787376 for 0445110068; and Fiat 55192948 / 55187291 for 0445110119.

Bosch 0445110259 and 0445110044: photographed research injectors

Bosch 0445110259 on the left and 0445110044 on the right
Bosch 0445110259 (left) and 0445110044 (right). Sergey Belchev, Zdravko Ivanov, Trifon Uzuntonev and Veselin Mihaylov, “Determination of the stages of the injection process for Common Rail injectors using vibration pulses”, IOP Conference Series: Materials Science and Engineering 977 (2020) 012023, figure 2; DOI: 10.1088/1757-899X/977/1/012023; extracted without changes, CC BY 3.0.

In this study, table 2, a CRI-NTR816E bench and accelerometers were used to estimate the delay between the start of the electrical command and needle lift. Three recordings were averaged for each point. These are measured timing examples, not delivery quantities or acceptance limits; the published description is insufficient to recreate a complete workshop test plan.

PartRail pressureCommand pulseMean start delay
044511025925 MPa (250 bar)900 µs292 µs
044511025980 MPa (800 bar)900 µs266 µs
0445110259135 MPa (1,350 bar)900 µs248 µs
044511004425 MPa (250 bar)900 µs272 µs
044511004480 MPa (800 bar)900 µs232 µs
0445110044135 MPa (1,350 bar)900 µs236 µs

Part-specific fixture information

For the listed Mercedes family including 0445110011 and 0445110189, Hartridge's 2011 AVM2-PC HK900 / CRi-PC bulletin lists nosepiece HK907 (NTA5101), backleak adaptor HK909 (NTA5301), clamp HK912 (NTA5601), pipe AHP5065 and cable HK902. For the Renault 1.9 dCi group including 0445110146, the clamp is HK969 (NTA5631); the listed nosepiece, backleak adaptor, pipe and cable are HK907, HK909, AHP5065 and HK902. This is historical tooling information, not a delivery limit; check the current equipment documentation and exact number. Source: Hartridge TIB195/11, issue 18.

No complete authoritative delivery/return acceptance values are published in the sources above. Use the applicable Bosch or approved bench test plan for the exact number, including its piezo/solenoid driver and all test points.

Revision 5: Bosch common-rail diesel injector part numbers

Injector catalogue › Diesel injector catalogue | Diesel testing | Test equipment

Application examples are identification leads for selected variants; a model or engine name alone does not establish fitment. Match the complete injector and vehicle OE numbers, suffix, engine code, year, emissions level, calibration and current supersessions. Entries grouped by a source do not establish that every number fits every vehicle in the group or that the numbers are interchangeable.

Diesel delivery is meaningful only with the matching injector, bench, fluid, temperature, rail pressure, drive waveform, pulse and counting conditions. Where a complete acceptance plan is not published here, use the current authorised plan for the actual injector and bench.

Example Bosch common-rail diesel injector
Bosch common-rail injector from a Deutz 7.2-litre diesel used in Volvo FE/FL; example only, not a photograph of a numbered entry. Photo: Panoha / Wikimedia Commons, CC BY-SA 3.0; cropped by a Commons contributor.
Cutaway of an electronically controlled Bosch diesel common-rail injector
Bosch diesel common-rail injector cutaway, shown for construction rather than part identification. Photo L.Kenzel; background removed by Chris828, image resized. Wikimedia Commons source; CC BY-SA 3.0.

Bosch new and exchange numbers

New Bosch numbers, exchange references, Bosch CRI classifications and broad application examples below are from the Bosch Autospec exchange-injector article (2014). The exchange number is a catalogue cross-reference, not the number stamped on every new injector. Photos at supplier links may show a representative product.

Individual solenoid OE lookups are from the Bosch-number cross-reference list. Piezo references come from FIRAD’s September 2024 catalogue, which sometimes groups several injector and OE numbers under one service family; those groups are marked below and do not prove direct interchange.

New part number; alternate spacingBosch typeBosch BX exchange numberApplication group / illustration
0445110189
0 445 110 189
0445 110 189
CRI 10986435055Mercedes Sprinter; OM611/OM612 2.1–2.7
OE Mercedes A6110701687. Example: Sprinter 311 CDI 2.2, OM611.981, 2002–06 (application / photo).
0445110059
0 445 110 059
0445 110 059
CRI 10986435149Chrysler Voyager / Jeep Cherokee 2.5–2.8
OE Chrysler 05066820AA.
0445110216
0 445 110 216
0445 110 216
CRI 20986435091BMW 2.0 / 3.0 diesel group; supplier photo
OE BMW 13537793836 / 13537794334.
0445110183
0 445 110 183
0445 110 183
CRI 20986435102Fiat 500 / Grande Punto, Ford Ka, Vauxhall 1.3 diesel group
OE Fiat 55197875; Ford 1538758; Opel / Vauxhall 93183910.
0445110201
0 445 110 201
0445 110 201
CRI 10986435063Mercedes Vito, OM611 2.2 / OM612 2.7 group
OE Mercedes A6130700887. Example: E 320 CDI W210, 145 kW, 1999–2002 (application listing).
0445110131
0 445 110 131
0445 110 131
CRI 20986435084BMW 3.0 diesel group
OE BMW 13537789661 / 13537789670 / 13537787187.
0445110146
0 445 110 146
0445 110 146
CRI 10986435007Renault 1.9 dCi group, including Laguna / Trafic
OE Renault 8200238528.
0445110011
0 445 110 011
0445 110 011
CRI 10986435004Mercedes OM611; selected C/E-Class and Vito
OE Mercedes A6110700587.
0445115078
0 445 115 078
0445 115 078
CRI 3 piezo0986435358Audi 3.0 TDI group
FIRAD service group lists VW / Audi 059130277AB / AA / AH / BD for this and other numbers; verify the exact suffix and supersession.
0445115028
0 445 115 028
0445 115 028
CRI 3 piezo0986435352VW Crafter 2.5 TDI group
OE VW 076130277. Example: Crafter 2.5 TDI BJJ, selected variants (application / photo); additional listed engine codes.
0445115063
0 445 115 063
0445 115 063
CRI 3 piezo0986435355Mercedes OM642 3.0 and selected Chrysler / Jeep
FIRAD service group lists Mercedes A6420700587 / A6420701387 and Jeep / Chrysler 68028405AA.
0445115068
0 445 115 068
0445 115 068
CRI 3 piezo0986435356Mercedes Sprinter / Vito OM646 2.1
OE Mercedes A6460701487, listed in FIRAD’s service group.
0445115007
0 445 115 007
0445 115 007
CRI 3 piezo0986435350Renault / Vauxhall 2.0 dCi group
OE Renault 8200340068 / 166003429R; Opel / Vauxhall 93161695, listed in FIRAD’s service group; Renault Espace / Laguna / Koleos 2.0 dCi.
0445115070
0 445 115 070
0445 115 070
CRI 3 piezo0986435354BMW 3.0 diesel group
FIRAD service group lists BMW 13537807208. Example: BMW 330d E90 3.0, 170 kW, 2005–08 (application listing).
0445116024
0 445 116 024
0445 116 024
CRI 3 piezo0986435394BMW 2.0 / 3.0 diesel group
FIRAD lists BMW 13537805429 / 13537805428. Example: BMW 320d xDrive E90 2.0, N47D20C, 120–130 kW, 2008–10 (application listing).
0445115061
0 445 115 061
0445 115 061
CRI 3 piezo0986435398Mercedes Sprinter OM642 3.0 group
OE Mercedes 6420701587 listed in the Flight Diesel service group. Example: Sprinter 319 / 519 CDI, OM642.992 V6 (ATS parts catalogue); confirm the exact vehicle and supersession.
0445115067
0 445 115 067
0445 115 067
CRI 3 piezo0986435402Chrysler / Dodge / Jeep 2.8 diesel group
OE Chrysler / Dodge / Jeep 68042029AA; Chrysler KRX042029AA. Example: Grand Voyager V 2.8 CRD ENS, 120 kW, from 10/2007 (vehicle details and supplier photo).

0445110107 / 0 445 110 107 / 0445 110 107: the Hartridge tooling bulletin places this number in a Mercedes CDI application group. The number cross-reference lists Mercedes A6110701487. A separate 2018 spray-research paper identifies a Bosch 0445110107 as a six-hole injector with 0.18 mm holes and 156° included angle. The laboratory reports 300 and 500 bar spray tests, a 12 mg injection quantity and fuel temperature of 21.5 °C, using diesel and butanol/diesel blends. These are research conditions, not a workshop delivery acceptance plan; the paper does not give the complete service-test drive parameters.

Additional identification

0445110044 / 0 445 110 044: the Bosch-number cross-reference lists PSA 198071 / 96375360 and Suzuki 15310-67G12. The Turbo Next catalogue places this number in the 2.0 HDi / JTD family, including Citroën Berlingo, Xsara and Peugeot 206 / 306 / 406 / Expert / Partner applications from 1999 onward; verify the exact engine and OE suffix. The photograph below shows this number at right.

0445110259 / 0 445 110 259: supplier lists a 1.6 HDi / TDCi application group and nozzle DLLA149P1515. The cross-reference list gives PSA 1980J3 and Ford 5M5Q-9F593-AA / 1425514. Part and product photograph. Verify the complete number; the nozzle code is not a substitute for the full injector.

0445110002, 0445110068 and 0445110119 (0 445 110 002 / 068 / 119): Hartridge TIB195/11 groups them with Alfa Romeo 145/146/156/166 and Fiat / Lancia 1.9 or 2.4 JTD applications. The bulletin groups applications; confirm each vehicle by its OE number. The individual cross-reference list gives Fiat 46472233 / 46462971 for 0445110002; Fiat 46787376 for 0445110068; and Fiat 55192948 / 55187291 for 0445110119.

Bosch 0445110259 and 0445110044: photographed research injectors

Bosch 0445110259 on the left and 0445110044 on the right
Bosch 0445110259 (left) and 0445110044 (right). Sergey Belchev, Zdravko Ivanov, Trifon Uzuntonev and Veselin Mihaylov, “Determination of the stages of the injection process for Common Rail injectors using vibration pulses”, IOP Conference Series: Materials Science and Engineering 977 (2020) 012023, figure 2; DOI: 10.1088/1757-899X/977/1/012023; extracted without changes, CC BY 3.0.

In this study, table 2, a CRI-NTR816E bench and accelerometers were used to estimate the delay between the start of the electrical command and needle lift. Three recordings were averaged for each point. These are measured timing examples, not delivery quantities or acceptance limits; the published description is insufficient to recreate a complete workshop test plan.

PartRail pressureCommand pulseMean start delay
044511025925 MPa (250 bar)900 µs292 µs
044511025980 MPa (800 bar)900 µs266 µs
0445110259135 MPa (1,350 bar)900 µs248 µs
044511004425 MPa (250 bar)900 µs272 µs
044511004480 MPa (800 bar)900 µs232 µs
0445110044135 MPa (1,350 bar)900 µs236 µs

Part-specific fixture information

For the listed Mercedes family including 0445110011 and 0445110189, Hartridge's 2011 AVM2-PC HK900 / CRi-PC bulletin lists nosepiece HK907 (NTA5101), backleak adaptor HK909 (NTA5301), clamp HK912 (NTA5601), pipe AHP5065 and cable HK902. For the Renault 1.9 dCi group including 0445110146, the clamp is HK969 (NTA5631); the listed nosepiece, backleak adaptor, pipe and cable are HK907, HK909, AHP5065 and HK902. This is historical tooling information, not a delivery limit; check the current equipment documentation and exact number. Source: Hartridge TIB195/11, issue 18.

No complete authoritative delivery/return acceptance values are published in the sources above. Use the applicable Bosch or approved bench test plan for the exact number, including its piezo/solenoid driver and all test points.