Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Injectors
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Bosch

Injector catalogue › Diesel injector catalogue | Diesel testing | Test equipment

Application examples are identification leads for selected variants; a model or engine name alone does not establish fitment. Match the complete injector and vehicle OE numbers, suffix, engine code, year, emissions level, calibration and current supersessions. Entries grouped by a source do not establish that every number fits every vehicle in the group or that the numbers are interchangeable.

Diesel delivery is meaningful only with the matching injector, bench, fluid, temperature, rail pressure, drive waveform, pulse and counting conditions. Where a complete acceptance plan is not published here, use the current authorised plan for the actual injector and bench.

Example Bosch common-rail diesel injector
Bosch common-rail injector from a Deutz 7.2-litre diesel used in Volvo FE/FL; example only, not a photograph of a numbered entry. Photo: Panoha / Wikimedia Commons, CC BY-SA 3.0; cropped by a Commons contributor.
Cutaway of an electronically controlled Bosch diesel common-rail injector
Bosch diesel common-rail injector cutaway, shown for construction rather than part identification. Photo L.Kenzel; background removed by Chris828, image resized. Wikimedia Commons source; CC BY-SA 3.0.

Bosch new and exchange numbers

New Bosch numbers, exchange references, Bosch CRI classifications and broad application examples below are from the Bosch Autospec exchange-injector article (2014). The exchange number is a catalogue cross-reference, not the number stamped on every new injector. Photos at supplier links may show a representative product.

New part number; alternate spacingBosch typeBosch BX exchange numberApplication group / illustration
0445110189
0 445 110 189
0445 110 189
CRI 10986435055Mercedes Sprinter; OM611/OM612 2.1–2.7
0445110059
0 445 110 059
0445 110 059
CRI 10986435149Chrysler Voyager / Jeep Cherokee 2.5–2.8
0445110216
0 445 110 216
0445 110 216
CRI 20986435091BMW 2.0 / 3.0 diesel group; supplier photo
0445110183
0 445 110 183
0445 110 183
CRI 20986435102Fiat 500 / Grande Punto, Ford Ka, Vauxhall 1.3 diesel group
0445110201
0 445 110 201
0445 110 201
CRI 10986435063Mercedes Vito, OM611 2.2 / OM612 2.7 group
0445110131
0 445 110 131
0445 110 131
CRI 20986435084BMW 3.0 diesel group
0445110146
0 445 110 146
0445 110 146
CRI 10986435007Renault 1.9 dCi group, including Laguna / Trafic
0445110011
0 445 110 011
0445 110 011
CRI 10986435004Mercedes OM611; selected C/E-Class and Vito
0445115078
0 445 115 078
0445 115 078
CRI 3 piezo0986435358Audi 3.0 TDI group
0445115028
0 445 115 028
0445 115 028
CRI 3 piezo0986435352VW Crafter 2.5 TDI group
0445115063
0 445 115 063
0445 115 063
CRI 3 piezo0986435355Mercedes OM642 3.0 and selected Chrysler / Jeep
0445115068
0 445 115 068
0445 115 068
CRI 3 piezo0986435356Mercedes Sprinter / Vito OM646 2.1
0445115007
0 445 115 007
0445 115 007
CRI 3 piezo0986435350Renault / Vauxhall 2.0 dCi group
0445115070
0 445 115 070
0445 115 070
CRI 3 piezo0986435354BMW 3.0 diesel group
0445116024
0 445 116 024
0445 116 024
CRI 3 piezo0986435394BMW 2.0 / 3.0 diesel group
0445115061
0 445 115 061
0445 115 061
CRI 3 piezo0986435398Mercedes Sprinter OM642 3.0 group
0445115067
0 445 115 067
0445 115 067
CRI 3 piezo0986435402Chrysler / Dodge / Jeep 2.8 diesel group

0445110107 / 0 445 110 107 / 0445 110 107: the Hartridge tooling bulletin places this number in a Mercedes CDI application group. A separate 2018 spray-research paper identifies a Bosch 0445110107 as a six-hole injector with 0.18 mm holes and 156° included angle. The laboratory reports 300 and 500 bar spray tests, a 12 mg injection quantity and fuel temperature of 21.5 °C, using diesel and butanol/diesel blends. These are research conditions, not a workshop delivery acceptance plan; the paper does not give the complete service-test drive parameters.

Additional identification

0445110259 / 0 445 110 259: supplier lists a 1.6 HDi / TDCi application group and nozzle DLLA149P1515. Part and product photograph. Verify the complete number; the nozzle code is not a substitute for the full injector.

0445110002, 0445110068 and 0445110119 (0 445 110 002 / 068 / 119): Hartridge TIB195/11 groups them with Alfa Romeo 145/146/156/166 and Fiat / Lancia 1.9 or 2.4 JTD applications. The bulletin groups applications; confirm each vehicle by its OE number.

Part-specific fixture information

For the listed Mercedes family including 0445110011 and 0445110189, Hartridge's 2011 AVM2-PC HK900 / CRi-PC bulletin lists nosepiece HK907 (NTA5101), backleak adaptor HK909 (NTA5301), clamp HK912 (NTA5601), pipe AHP5065 and cable HK902. For the Renault 1.9 dCi group including 0445110146, the clamp is HK969 (NTA5631); the listed nosepiece, backleak adaptor, pipe and cable are HK907, HK909, AHP5065 and HK902. This is historical tooling information, not a delivery limit; check the current equipment documentation and exact number. Source: Hartridge TIB195/11, issue 18.

No complete authoritative delivery/return acceptance values are published in the sources above. Use the applicable Bosch or approved bench test plan for the exact number, including its piezo/solenoid driver and all test points.