Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Supercharging
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Part of the supercharger types and Eaton model guide.

What it is

The M45 moves a nominal 45 cubic inches per rotor turn. It is encountered on first-generation supercharged MINIs and certain Mercedes and Lotus applications. Shared rotor size does not make complete units interchangeable.

Eaton MP45 Roots supercharger viewed through its inlet.
Eaton MP45 example; the vehicle application is not identified. Photo: Tennen-Gas, Wikimedia Commons, CC BY-SA 2.5; unchanged from the Commons file.
SpecificationDetail
Rotor familyM-series Roots-type; application-specific housings
Nominal supercharger displacement45 in³ ≈ 0.737 L / rotor revolution

Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.

Cars, engines and examples

These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.

Vehicle and periodEngine displacement and typeInstallation and identificationEvidence
MINI Cooper S R531.6 L (1,598 cm³) W11 inline-fourFactory supercharged hatchback; the recognition form identifies an Eaton M45.Motorsport Australia
Lotus Elise SC, 2008 model year1.8 L Toyota 2ZZ-GE inline-fourFactory Elise SC: M45 installation with Eaton rotor pack and Lotus-specific integral housing.Lotus service notes
Mercedes SLK 200/230 Kompressor, specified M111 applications2.0 L or 2.3 L M111 inline-fourSupplier lists specific 2000–2004 M45 donors; verify part number and production date.Hyde application notes

Design and application

Cars use different snouts, mounting faces, inlets and ancillary drives. Lotus's Elise SC documentation describes an M45 arrangement while its Exige comparison describes an M62: the car and specification matter. A smaller pulley increases blower speed and can increase heat and belt demand.

Identification, maintenance and upgrades

Inspect the belt path, input bearings, coupler and rotor clearances. Some MINI installations drive the water pump from the rear of the supercharger, so assess the complete drive. Check cooling, fuelling and knock control before changing the pulley ratio.

Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.

Sources