Part of the supercharger types and Eaton model guide.
What it is
The M45 moves a nominal 45 cubic inches per rotor turn. It is encountered on first-generation supercharged MINIs and certain Mercedes and Lotus applications. Shared rotor size does not make complete units interchangeable.

| Specification | Detail |
|---|---|
| Rotor family | M-series Roots-type; application-specific housings |
| Nominal supercharger displacement | 45 in³ ≈ 0.737 L / rotor revolution |
Displacement: the blower volume is nominal air volume moved per rotor revolution. The engine figures below are cylinder capacity. Actual delivered air depends on speed, pressure, leakage and temperature.
Cars, engines and examples
These are documented examples, not a complete fitment catalogue. Factory equipment and aftermarket conversions are identified separately. Confirm market, vehicle, engine code and complete part number.
| Vehicle and period | Engine displacement and type | Installation and identification | Evidence |
|---|---|---|---|
| MINI Cooper S R53 | 1.6 L (1,598 cm³) W11 inline-four | Factory supercharged hatchback; the recognition form identifies an Eaton M45. | Motorsport Australia |
| Lotus Elise SC, 2008 model year | 1.8 L Toyota 2ZZ-GE inline-four | Factory Elise SC: M45 installation with Eaton rotor pack and Lotus-specific integral housing. | Lotus service notes |
| Mercedes SLK 200/230 Kompressor, specified M111 applications | 2.0 L or 2.3 L M111 inline-four | Supplier lists specific 2000–2004 M45 donors; verify part number and production date. | Hyde application notes |
Design and application
Cars use different snouts, mounting faces, inlets and ancillary drives. Lotus's Elise SC documentation describes an M45 arrangement while its Exige comparison describes an M62: the car and specification matter. A smaller pulley increases blower speed and can increase heat and belt demand.
Identification, maintenance and upgrades
Inspect the belt path, input bearings, coupler and rotor clearances. Some MINI installations drive the water pump from the rear of the supercharger, so assess the complete drive. Check cooling, fuelling and knock control before changing the pulley ratio.
Before increasing speed or load, match the complete fuel, ignition, cooling, bypass and engine-calibration package to the intended use. Refer to the exact supplier's specifications; a generic pulley size or blower displacement is not a safe operating limit.
Sources
- MINI R53 production-car recognition form. Accessed 2026-11-14.
- Lotus service notes: Elise SC M45 and Exige comparison. Accessed 2026-11-14.
- Specified Mercedes M45 donor applications. Accessed 2026-11-14.
- Harrop R53 notes: stock M45 and TVS900 replacement. Accessed 2026-11-14.
- Bentley Publishers: MINI W11 front and rear supercharger reservoirs. Accessed 2026-11-14.