Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Tools
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
Diagnostic tools, Flashing and tuning tools
Manufacturers
BMW

VVDI BIMTool Pro is Xhorse's BMW diagnostic interface. It is a different product from VVDI and VVDI2. Xhorse's BMW page describes Ethernet and Wi-Fi connection, DoIP module programming, faster programming on F and G chassis when a network cable is used, and direct ISN reading without opening the ECU for N13, N20, N55 and N63 examples. The same page says the interface can be used with BMW E-Sys and Rheingold. That is a pass-through claim. It does not include a BMW software licence or online account. [1]

Xhorse VVDI BIMTool Pro interface, case and leads
VVDI BIMTool Pro with case, OBD lead, bench lead and USB leads. Product by Xhorse. Photograph from the Xhorse UK product listing. Reproduced for identification and review, with acknowledgement. Source: Xhorse UK, VVDI BIMTool Pro, accessed 11 November 2026.

Software

The BMW page publishes BIMTool Pro installers and a configuration file, with a firmware note for the listed build. Install only software obtained for the interface you hold, and confirm the firmware the page requires before using a listed installer. Coverage of a later control unit has to be read from the current Xhorse notes. The page's ISN examples are four petrol families, not every DME. [1]

An August 2023 entry on that page says the tool can unlock a BDC module via the diagnostic socket, and it excludes one stated software family from that OBD method. Do not treat that sentence as a procedure or as coverage of later BDC units. Key and immobiliser work needs authority to work on the vehicle. [1]

Relation to other Xhorse tools

VVDI2 is the multi-brand key and diagnostic tool discussed on the VVDI page. BIMTool Pro is the BMW unit pictured above, with its own case, Ethernet port and BMW software. A workshop observation recorded there about VVDI2 software is about VVDI2, not this interface. VVDI Prog is a separate programmer.

Workshop notes

Use a stable power supply during programming. Confirm whether the job is by the diagnostic socket, Ethernet or a bench connection before promising it. Saving the module data the software offers to save matters before a programming session. Interrupted programming can leave a module unusable.

Related pages

Specialist BMW diagnostic tools · Xhorse VVDI diagnostic and key tools · Xhorse automotive tools · BMW E-Sys · BMW ISTA D and Rheingold · Diagnostics over IP

Sources

Accessed 11 November 2026. Functions are Xhorse's description.