
OLS300 is EVC’s 8-bit and 16-bit EPROM simulator and monitor. It followed the OLS16. The module sits in place of the EPROM, through an adapter, so the processor reads the module’s memory instead of the chip. EVC says the memory can also be changed while the engine is running, with a stated access time of 50 ns for both simulation and live changes. A monitor function shows the processor’s successive accesses, which is the map-access display in EVC’s access-indicator comparison. EVC limits that method to control units up to ME7 and EDC15.
The published memory size is 4 MB, which EVC also states as 32 Mbit. Connection is USB 1.1, and USB also charges the internal lithium-polymer battery. EVC says that battery allows several hours of operation away from the computer, and the manual describes about 8 to 14 hours depending on temperature. A separate power socket is fitted for continuous use. WinOLS updates the firmware. WinOLS 5 still supports the OLS300, except on Windows on ARM.
The module is sold with a PSOP44 adapter. Further adapters cover two PLCC32 devices, DIL28 and DIL32, an active adapter EVC names for older CMOS units such as Digifant, DIL40, and a PLCC68 adapter for the 87BC6QG and CC460. EVC also publishes a programmable pinout for unusual memories and a list of EPROM types. The adapter and the pin-1 orientation have to match the socket. EVC warns that a reversed or shifted cable can damage the control unit or the module.