Scope
The MBE 941 is a serial-interface standalone ECU from MBE Systems with a 55-way main connector. No complete public pinout has been located; the positions documented here come from two sources. MBE Systems' serial interface protocol description for the 941AA35x (manufacturer documentation) gives the serial port and mapping-trim positions on the main connector and on the 9-pin mapping connector inside the 941, whose numbering is also used by the MBE standard harness interface. SBD Motorsport's throttle-potentiometer guide for 941 and 970 ECUs (specialist documentation) gives the throttle sensor positions. All 55 main-connector positions and 9 mapping-connector positions are listed; those not covered by the sources are marked as not established.
Documented positions
On the main connector, position 45 is the ECU serial transmit, 46 the serial receive, 7 the ground for the serial and mapping connections, 47 the fuel trim input and 10 the ignition trim input. On the 9-pin mapping connector the same signals are on pins 2 (transmit), 3 (receive), 1 (ground), 6 (fuel trim) and 7 (ignition trim); for a PC 9-way D connector, transmit, receive and ground go to pins 2, 3 and 5. The serial port is a 5 V interface. Holding the fuel and ignition trim inputs above zero volts, as a 914 mapping box or an MBE comms lead does, selects byte mode for Easimap; with both trims at zero or open and logging enabled, the ECU broadcasts up to 16 parameters at 19200 baud. SBD gives position 30 as the 5 V throttle reference, 12 as the electronic ground and sensor return and 35 as the throttle signal; these are graded as suspected.
The sources list positions without face drawings, so both connectors are drawn as pin indexes. Assignments should be verified against the unit, its part number and harness before connecting power.
Sources
- Serial Interface Protocol Description for use on 941AA35x, MBE Systems Ltd (manufacturer documentation, hosted by SBD Motorsport), dated 10 June 2015. Accessed 19 November 2026.
- Throttle Pot wiring Culven Type as used on TP and MT Kits to Serial Based ECUs 967/970/941/956, SBD Motorsport (specialist documentation). Accessed 19 November 2026.
Connector pinout
MBE 941 (941AA35x) standalone ECU. Serial-port and mapping-trim positions on the 55-way main connector and the 9-pin mapping connector (inside the 941; the same numbering is used by the MBE standard harness interface) are from MBE Systems' serial interface protocol description (manufacturer documentation, dated 10 June 2015). Throttle sensor positions 12, 30 and 35 are from SBD Motorsport's throttle-pot guide for 941/970 ECUs (specialist documentation, graded suspected). All other positions are not documented in these sources. Both connectors are drawn as pin indexes; the face layouts are not given.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
55-way main ECU connector
View: Pin index only; face layout not shown in the sources
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Ground (serial and mapping) Cavity: Populated |
Confirmed MBE serial interface protocol description |
||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Ignition trim input Cavity: Populated |
Confirmed MBE serial interface protocol description |
Held above zero volts by a 914 mapping box or MBE comms lead to select byte mode. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Electronic ground / throttle sensor return Cavity: Populated |
Suspected SBD throttle-pot wiring guide |
SBD throttle-pot guide for 941/970. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Throttle reference (5 V out) Cavity: Populated |
Suspected SBD throttle-pot wiring guide |
SBD throttle-pot guide for 941/970. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Throttle signal Cavity: Populated |
Suspected SBD throttle-pot wiring guide |
SBD throttle-pot guide for 941/970. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Serial transmit (ECU TXD) Cavity: Populated |
Confirmed MBE serial interface protocol description |
5 V serial interface. | |
| Serial receive (ECU RCV) Cavity: Populated |
Confirmed MBE serial interface protocol description |
5 V serial interface. | |
| Fuel trim input Cavity: Populated |
Confirmed MBE serial interface protocol description |
Held above zero volts by a 914 mapping box or MBE comms lead to select byte mode. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown |
9-pin mapping connector (inside 941) / MBE standard harness interface
View: Pin index only; face layout not shown in the source
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Ground Cavity: Populated |
Confirmed MBE serial interface protocol description |
PC DB9 pin 5. | |
| Serial transmit (ECU TXD) Cavity: Populated |
Confirmed MBE serial interface protocol description |
PC DB9 pin 2. | |
| Serial receive (ECU RCV) Cavity: Populated |
Confirmed MBE serial interface protocol description |
PC DB9 pin 3. | |
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown | ||
| Fuel trim input Cavity: Populated |
Confirmed MBE serial interface protocol description |
||
| Ignition trim input Cavity: Populated |
Confirmed MBE serial interface protocol description |
||
| Unknown function Cavity: Unknown |
Unknown | ||
| Unknown function Cavity: Unknown |
Unknown |