Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
GEMS EM112
Applies to
GEMS EM112
Tool groups
None
Manufacturers
GEMS

Header and bays

The GEMS EM112 uses a 112-way Molex CMC header (64333-0100) divided into three keyed bays. Bay A is a 32-way black bay (mating plug Molex 64319-3211), bay B a 48-way brown bay (64320-1319) and bay C a 32-way grey bay (64319-1218). GEMS technical specification 103715 rev 11 (manufacturer documentation) names each cavity by column letter and row: A to H and rows 1 to 4 for bays A and C, and A to M without I and rows 1 to 4 for bay B. The diagram here is a pin index in that letter-and-row order. The CMC header's actual cavity sizes and spacing are not reproduced; GEMS draws the bays as C, B and A from left to right.

Assignments

Bays A and C carry most of the engine I/O:

  • the eight ignition coil drivers and eight injector drivers;
  • the two wideband lambda channels (A on bay C, B on bay A) with their heaters;
  • the knock inputs, the active-throttle feedback inputs and bridge drivers A and B;
  • main 12 V (C-G2), power returns, and the MAP, MAF, coolant and air temperature inputs.

Bay B carries:

  • Ethernet (A1–D1) and the three CAN buses (E1–K1);
  • timing inputs 5 to 12, the differential analogue inputs, the accelerator pedal and lambda inputs, and further analogue inputs;
  • bridge drivers C and D and PWM low-side drivers 9 to 12;
  • the main relay output (M2), main 12 V (M4) and secondary 12 V (L2).

The rev 11 specification is internally inconsistent in places. It labels both A-H1 and C-H1 as ignition coil driver 4, and repeats some software output codes. These entries are reproduced as printed and are not resolved here. A drawing confirmed by GEMS for the specific build should be used before wiring ignition outputs.

GEMS EM112 header pin index
GEMS EM112 bays A, B and C, pin index by column letter and row. Diagram redrawn by Tuning Wiki from GEMS technical specification 103715 rev 11.

Sources

  • GEMS EM112 Technical Specification, document 103715 rev 11, dated 12 May 2016, manufacturer documentation; connectors and pin-out tables, pages 2–4. Accessed 19 November 2026.

Connector pinout

Applicability

GEMS EM112, Molex CMC 112-way header (bay A 32-way black, bay B 48-way brown, bay C 32-way grey; mating plugs Molex 64319-3211, 64320-1319 and 64319-1218), from GEMS technical specification 103715 rev 11 (manufacturer documentation). The diagram is a pin index by column letter and row; the true cavity sizes and spacing of the CMC header are not reproduced. The source labels both A-H1 and C-H1 as ignition coil driver 4 and repeats some software codes; these are reproduced as printed and are unresolved.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Bay A, 32-way black (Molex 64319-3211)

Redrawn connector
View: Pin index by letter and row; not a scaled face view
Bay A, 32-way black (Molex 64319-3211) — Redrawn connector. Pin index by letter and row; not a scaled face view

Select a pin in a photograph or the index to highlight it.

Bay A, 32-way black (Molex 64319-3211) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Wideband lambda B 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda B 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda B heater
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 7
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 8
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 5
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver A−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 4 (O4)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Rev 11 labels both A-H1 and C-H1 as ignition coil driver 4; unresolved in the source.
Wideband lambda B 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda B 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

LIN bus
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

MAP input
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 6 (O26)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver A+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 3 (O3)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Knock input B+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Knock input B−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

5 V sensor supply 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 7
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 20
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 5
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Active throttle feedback 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Active throttle feedback 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Coolant temperature input
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Air inlet temperature input
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 8
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Power return
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 6
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bay B, 48-way brown (Molex 64320-1319)

Redrawn connector
View: Pin index by letter and row; not a scaled face view
Bay B, 48-way brown (Molex 64320-1319) — Redrawn connector. Pin index by letter and row; not a scaled face view

Select a pin in a photograph or the index to highlight it.

Bay B, 48-way brown (Molex 64320-1319) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Ethernet TX+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ethernet TX−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ethernet RX+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ethernet RX−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 2 high
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 2 low
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 1 high
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 1 low
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 3 high
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

CAN 3 low
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 10
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 9
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

5 V sensor supply 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 12
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 11
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 10
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 9
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 5
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 5
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 6
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

5 V sensor supply 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 6
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Secondary 12 V supply
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Main relay
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Differential analogue input B−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Differential analogue input B+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Accelerator pedal input 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Accelerator pedal input 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Lambda input 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Lambda input 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 27
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 26
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 25
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 24
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 12
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 11
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Differential analogue input A−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Differential analogue input A+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver C+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver C−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver D+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver D−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 7
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 8
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 16
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 31
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Power return
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Main 12 V supply
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bay C, 32-way grey (Molex 64319-1218)

Redrawn connector
View: Pin index by letter and row; not a scaled face view
Bay C, 32-way grey (Molex 64319-1218) — Redrawn connector. Pin index by letter and row; not a scaled face view

Select a pin in a photograph or the index to highlight it.

Bay C, 32-way grey (Molex 64319-1218) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Wideband lambda A 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda A 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda A heater
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

PWM low-side driver 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Power return
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 4 (O2)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Rev 11 labels both A-H1 and C-H1 as ignition coil driver 4; unresolved in the source.
Wideband lambda A 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Wideband lambda A 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 23
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

MAF input
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 3 (O26)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Main 12 V supply
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 2 (O2)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Knock input A−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Knock input A+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Timing input 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

5 V sensor supply 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 2
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver B+
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 3 (O1)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Active throttle feedback 4
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Active throttle feedback 3
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue ground 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 17
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Analogue input 15
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Fuel injector driver 1
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Bridge driver B−
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11

Ignition coil driver 1 (O1)
Cavity: Populated
Confirmed

GEMS EM112 spec 103715 rev 11