Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
ECUMaster EMU Black Lotus K4 plug-in
Applies to
ECUMaster EMU Black Lotus K4 plug-in
Tool groups
None
Manufacturers
ECUMaster, Lotus

The Lotus S2 K4 plug-in ECU sold through ECUMaster distributors is built by Road Race Rally Engineering (RRR) on the ECUMaster EMU Black platform. Besides the factory engine connector it has a 26-way rear spare connector for added inputs, communications and the wideband sensor. RRR's "Lotus K4 Plug-In ECU Functions assignment" (rev. 3) gives a function for every position; pins 14 to 19 are listed as not connected. The factory Lotus/Rover K4 connector is not covered by this table.

Assignments

Pins 1 and 20 carry +12 V from the main relay and pins 2 and 26 power ground. Pins 3 and 4 are CAN high and low, 5 and 6 RS232 TXD and RXD, 7 the flex fuel input, 8 a +5 V sensor supply, 9 and 10 analogue inputs 5 and 6, 11 and 13 EGT inputs 2 and 1, and 12 sensor ground. Pins 21 to 25 connect the wideband oxygen sensor (heater, Ip, Vs, Rcal and VGND).

Pin index of the RRR Lotus K4 plug-in ECU rear 26-way connector
Pin index only: the source gives a pin table, not the connector face layout. Redrawn by Tuning Wiki from the RRR Lotus K4 Plug-In ECU functions assignment (rev. 3).

The same document lists the application's use of the EMU Black outputs (for example ignition channels 1 and 2 for cylinders 1/4 and 2/3, and other ignition channels for fans, fuel pump and main relay). Universal EMU Black pin numbers do not apply to this unit.

Sources

Connector pinout

Applicability

RRR (Road Race Rally Engineering) Lotus S2 K4 plug-in ECU on the ECUMaster EMU Black platform: the 26-way rear spare (auxiliary) connector only, from the RRR 'Lotus K4 Plug-In ECU Functions assignment' document, rev. 3. The factory Lotus/Rover K4 engine connector is not covered. Pins 14 to 19 are marked not connected (N.C.) in the source. The source gives a pin table only, so this is a pin index: the connector face layout is not shown.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Rear spare connector (26 pins)

Pin index (face layout not shown in source)
View: Pin index only; face layout not shown in the source document
Rear spare connector (26 pins) — Pin index (face layout not shown in source). Pin index only; face layout not shown in the source document

Select a pin in a photograph or the index to highlight it.

Rear spare connector (26 pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
+12 V from main relay
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Power ground
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

CAN high
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

CAN low
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

RS232 TXD
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

RS232 RXD
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Flex fuel input
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

+5 V sensor supply
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Analogue input 5
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Analogue input 6
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

EGT input 2
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Sensor ground
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

EGT input 1
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Not connected
Cavity: Unused
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

+12 V from main relay
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Wideband oxygen heater
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Wideband oxygen Ip
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Wideband oxygen Vs
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Wideband oxygen Rcal
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Wideband oxygen VGND
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3

Power ground
Cavity: Populated
Confirmed

RRR Lotus K4 Plug-In ECU functions assignment rev. 3