The Lotus S2 K4 plug-in ECU sold through ECUMaster distributors is built by Road Race Rally Engineering (RRR) on the ECUMaster EMU Black platform. Besides the factory engine connector it has a 26-way rear spare connector for added inputs, communications and the wideband sensor. RRR's "Lotus K4 Plug-In ECU Functions assignment" (rev. 3) gives a function for every position; pins 14 to 19 are listed as not connected. The factory Lotus/Rover K4 connector is not covered by this table.
Assignments
Pins 1 and 20 carry +12 V from the main relay and pins 2 and 26 power ground. Pins 3 and 4 are CAN high and low, 5 and 6 RS232 TXD and RXD, 7 the flex fuel input, 8 a +5 V sensor supply, 9 and 10 analogue inputs 5 and 6, 11 and 13 EGT inputs 2 and 1, and 12 sensor ground. Pins 21 to 25 connect the wideband oxygen sensor (heater, Ip, Vs, Rcal and VGND).
The same document lists the application's use of the EMU Black outputs (for example ignition channels 1 and 2 for cylinders 1/4 and 2/3, and other ignition channels for fans, fuel pump and main relay). Universal EMU Black pin numbers do not apply to this unit.
Sources
- Road Race Rally Engineering: Lotus K4 Plug-In ECU Functions assignment, rev. 3, application builder's document (three pages), distributed by ECUMaster Benelux. Accessed 19 November 2026.
Connector pinout
RRR (Road Race Rally Engineering) Lotus S2 K4 plug-in ECU on the ECUMaster EMU Black platform: the 26-way rear spare (auxiliary) connector only, from the RRR 'Lotus K4 Plug-In ECU Functions assignment' document, rev. 3. The factory Lotus/Rover K4 engine connector is not covered. Pins 14 to 19 are marked not connected (N.C.) in the source. The source gives a pin table only, so this is a pin index: the connector face layout is not shown.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
Rear spare connector (26 pins)
View: Pin index only; face layout not shown in the source document
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| +12 V from main relay Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Power ground Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| CAN high Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| CAN low Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| RS232 TXD Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| RS232 RXD Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Flex fuel input Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| +5 V sensor supply Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Analogue input 5 Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Analogue input 6 Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| EGT input 2 Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Sensor ground Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| EGT input 1 Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Not connected Cavity: Unused |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| +12 V from main relay Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Wideband oxygen heater Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Wideband oxygen Ip Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Wideband oxygen Vs Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Wideband oxygen Rcal Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Wideband oxygen VGND Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |
||
| Power ground Cavity: Populated |
Confirmed RRR Lotus K4 Plug-In ECU functions assignment rev. 3 |