Connectors covered
The MaxxECU GEN1 plug-in adapter for the Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) fits MaxxECU STREET, RACE and PRO units. Besides the factory-loom plug, the adapter carries a 16-pin extra connector and a 3-pin connector for analogue input 4; the wideband lambda sensor is wired through a pre-wired 6-pin connector for a Bosch LSU 4.2 sensor. This article covers 25 pins: 16 on the extra connector, 6 on the sensor connector and 3 on the analogue input connector. The factory ECU connector is not covered.
16-pin extra connector
The manufacturer's guide draws the 16-pin connector from the wire side of the pre-wired harness, with pins 1 to 8 on the upper row and 9 to 16 on the lower row; the cavities also carry letters (H to A on the upper row, S to J on the lower). Pins 1, 2, 3, 4, 9 and 10 carry the wideband lambda signals. The other assignments are pin 5, GPO 7 / DIN 3 (output or digital input); pin 8, INJ 8 (output); pin 11, +12 V output; pin 12, +12 V output; pin 13, engine ground; pin 14, AIN 1 (temperature input); pin 15, AIN 2 (temperature input); pin 16, AIN 3 (0-5 V analogue input). Pins 5 and 8 are not available with the MaxxECU STREET. The guide lists no function for pins 6 and 7.
Wideband sensor and analogue input connectors
The 6-pin LSU 4.2 sensor connector, also seen from the wire side, carries VS on pin 1, RCAL on 2, heater +12 V on 3, heater H- on 4, VREF on 5 and IP on 6. The 3-pin connector has sensor ground on pin 1, analogue input 4 (0-5 V) on pin 2 and the +5 V sensor supply on pin 3; the guide does not draw its face, so the diagram gives it as a pin index only.
The guide is manufacturer documentation, last updated in 2017. Pin assignments should be checked against the adapter revision and the MaxxECU unit before wiring.
Sources
- Nissan Skyline R32/33 GT-R/GTS-T (RB25/26), MaxxECU documentation (manufacturer installation guide), last updated 15 March 2017. Accessed 19 November 2026.
Connector pinout
MaxxECU GEN1 plug-in adapter for Nissan Skyline R32/33 GT-R/GTS-T (RB25/26), for MaxxECU STREET, RACE and PRO. Covers the adapter's 16-pin extra connector, the pre-wired 6-pin Bosch LSU 4.2 wideband sensor connector and the 3-pin analogue input 4 connector, from the manufacturer's installation guide (last updated 15 March 2017). The factory ECU connector pinout is not covered. Connectors viewed from the wire side; the 3-pin connector is a pin index only.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
16-pin extra connector (adapter)
View: Wire side of the pre-wired adapter harness connector, as drawn by the manufacturer
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Wideband lambda VREF Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Wideband lambda VS Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Wideband lambda shield Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Wideband lambda heater H- Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| GPO 7 / DIN 3 (output or digital input) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
Not available on MaxxECU STREET. | |
| Unknown function Cavity: Unknown |
Unknown | No function listed in the manufacturer table. | |
| Unknown function Cavity: Unknown |
Unknown | No function listed in the manufacturer table. | |
| INJ 8 (output) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
Not available on MaxxECU STREET. | |
| Wideband lambda IP Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Wideband lambda RCAL Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| +12 V output Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| +12 V output Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Engine ground Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| AIN 1 (temperature input) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| AIN 2 (temperature input) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| AIN 3 (0-5 V analogue input) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
Wideband sensor connector (Bosch LSU 4.2, 6-pin)
View: Wire side of the pre-wired connector
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| VREF Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| IP Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Heater +12 V Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| Heater H- Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| VS Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| RCAL Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
3-pin extra connector (analogue input 4)
View: Pin index only; face layout not shown in the source
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Sensor ground Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| AIN 4 analogue input (0-5 V) Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |
||
| +5 V sensor supply Cavity: Populated |
Confirmed MaxxECU Nissan Skyline R32/33 GT-R/GTS-T (RB25/26) plug-in guide (manufacturer documentation) |