Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Omex 600
Applies to
Omex 600
Tool groups
None
Manufacturers
None

The Omex 600 series (OMEM600) standalone ECU uses one 36-way loom connector. Its cavities are in three rows, A, B and C, with positions 1 to 12 in each row; the middle row is offset by half a pitch. According to the manufacturer's installation manual, 33 of the 36 cavities carry a function and 11A, 1C and 5C have none listed.

Connector pinout

The connector face is drawn from the wiring-loom side, as in the manual's section 5.3. Power enters at 4A (battery power), and 5A and 7B are chassis earths. 6A is the sensor ground and 9C is the 5 V sensor supply. The crank sensor is at 7A, with its timing ground at 8A. Injection 1 and 2 are at 1B and 2B, and ignition 1 and 2 at 1A and 12A. The four idle-control outputs are at 3C, 2C, 3B and 3A (idle 1 to 4). Auxiliary outputs 1 to 4 are at 4B, 12B, 4C and 2A, and auxiliary inputs 1 to 3 at 10A, 11B and 11C. The pin list gives each loom colour; where a cable has two colours, the manual says the main and tracer colours can be either way round.

The 2v20 manual table cited on the hub agrees for every pin it lists, but it omits the knock-sensor input at 10B, which the 2v01 manual includes. Check the terminal numbering on the actual plug before wiring.

Diagram redrawn by Tuning Wiki from the Omex OMEM600 installation manual.

Sources

Connector pinout

Applicability

Omex 600 series (OMEM600) standalone ECU, 36-way loom connector, from the manufacturer's installation manual 2v01 (section 5.3, ECU connector table and loom-side drawing); the 2v20 manual table agrees for every pin it lists. Manufacturer documentation. Cavities 11A, 1C and 5C have no function listed. Loom colours are given in the pin notes; where a cable has two colours, the main and tracer colour can be either way round.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

ECU loom connector (36-way)

Redrawn connector face
View: Harness plug viewed from the wiring-loom side, as drawn in the manufacturer manual
ECU loom connector (36-way) — Redrawn connector face. Harness plug viewed from the wiring-loom side, as drawn in the manufacturer manual

Select a pin in a photograph or the index to highlight it.

ECU loom connector (36-way) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Ignition 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Violet.
Aux out 4
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Yellow / violet.
Idle 4
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Brown / pink.
Battery power
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Red.
Chassis earth 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Black.
Sensor ground
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Grey.
Crank sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Black screened red.
Timing ground
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue cables from inside the screened cables.
Coolant temperature sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White / violet.
Aux in 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White / yellow.
Unknown function
Cavity: Unknown
Unknown

Omex OMEM600 installation manual 2v01, section 5.3

No function listed in the manual.
Ignition 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Yellow.
Injection 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Brown.
Injection 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White.
Idle 3
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Brown / violet.
Aux out 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Yellow / green.
Fuel pump
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue / white.
MAP sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Green.
Chassis earth 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Black.
Shift light
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue / grey.
Air temperature sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Green / white.
Knock sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Grey screened.
Aux in 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White / orange.
Aux out 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Yellow / red.
Unknown function
Cavity: Unknown
Unknown

Omex OMEM600 installation manual 2v01, section 5.3

No function listed in the manual.
Idle 2
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Brown / orange.
Idle 1
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Brown / yellow.
Aux out 3
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Yellow / black.
Unknown function
Cavity: Unknown
Unknown

Omex OMEM600 installation manual 2v01, section 5.3

No function listed in the manual.
Radiator fan relay
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue / black.
Oxygen (lambda) sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White / red.
Throttle position sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Orange.
5 V sensor supply out
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Pink.
Road speed sensor
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue screened red.
Aux in 3
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: White / pin (as printed).
Tacho
Cavity: Populated
Confirmed

Omex OMEM600 installation manual 2v01, section 5.3

Loom colour: Blue / yellow.