Connector pinout
The Electromotive TECm is a replacement motherboard fitted inside a Bosch Motronic 413 or 506 BMW ECU housing (including EWS versions), so it uses the original Motronic harness connector. The manufacturer's hardware manual (section 7.4) lists pins 1 to 88 of that connector with a primary function, an alternate function where the pin can be reassigned in WinTEC4, and the wire colour of the documented BMW loom. All 88 pins are given here; this is manufacturer documentation.
Power and ground: switched +12 V on pins 26 and 56, +12 V on pin 54, ECU relay control on pin 27, power grounds on pins 6, 15, 34 and 55, sensor grounds on pins 14, 28 and 44, shield ground on pin 45 and knock ground on pin 71; a 5 V sensor supply is on pin 59. Injector outputs 1 to 6 are on pins 33, 32, 31, 5, 3 and 4, and coil outputs 1 to 6 on pins 50, 51, 52, 23, 25 and 24. Crank sensor is on pins 16 (+) and 43 (−), cam sensor on pin 17, oxygen sensor on pins 13 (+) and 40 (−) with heater control on pin 38, knock inputs on pins 70 and 69, and TPS, air temperature and coolant temperature on pins 73, 77 and 78. Pin 41 is the MAF input (alternatively MAP).
NC is the manual's primary-function label; pins 9, 10, 76 and 81 are NC by default but list alternate PWM or analog functions. The manual does not show the connector face, so the diagram is a numbered pin index rather than a face view. Confirm the original ECU number, harness and TECm configuration before wiring.
Sources
- Electromotive TECm User's Manual v1.0, Electromotive, Inc., 2013; section 7.4 pin-out information. Manufacturer documentation. Accessed 19 November 2026.
- Electromotive TECm product page; Motronic 413/506 replacement scope. Manufacturer. Accessed 19 November 2026.
Connector pinout
Electromotive TECm replacement motherboard for Bosch Motronic 413 and 506 BMW ECUs (M50/S50 applications per the manufacturer). Pins 1-88 of the original Motronic harness connector as listed in the TECm hardware manual, section 7.4; manufacturer documentation. The manual does not show the connector face, so the diagram is a pin index. NC is the manual's primary-function label; pins 9, 10, 76 and 81 also list alternate functions. Wire colours describe the documented vehicle loom.
View orientation is stated beside each photograph. Unknown functions remain in the pin index.
Motronic harness connector (88 pins)
View: Pin index; physical face layout and viewing side not shown in the source
Select a pin in a photograph or the index to highlight it.
| Pin | Function / cavity | Confidence / source | Notes |
|---|---|---|---|
| Fuel Pump Output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Green | |
| IAC Output (inverted) (alternate: PWM GPO) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Yellow | |
| Injector 5 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Green | |
| Injector 6 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Violet | |
| Injector 4 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Blue | |
| Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| Cam timing solenoid (alternate: PWM GPO) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Green/Blue | |
| Check Engine Light output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Green | |
| NC (manual label); alternate function: PWM GPO Cavity: Unknown |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label); alternate function: Analog GPI Cavity: Unknown |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| EGO + Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Yellow | |
| Sensor Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| Crank Sensor + Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Yellow | |
| Cam Sensor + Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Yellow | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Coil 4 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Blue | |
| Coil 6 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Violet | |
| Coil 5 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Green | |
| +12v switched Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Red | |
| ECU Relay Control Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| Sensor Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Orange | |
| IAC Output (alternate: PWM GPO) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Green | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Injector 3 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Yellow | |
| Injector 2 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Red | |
| Injector 1 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/White | |
| Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Evaporative Solenoid output (alternate: PWM GPO) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| O2 Sensor Heater Control Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Green | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| EGO - Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| MAF Input (alternate: MAP Input) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Gray/Yellow | |
| Speed input (alternate: ON/OFF GPI) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/White | |
| Crank Sensor - Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| Sensor Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| Shield Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Bare | |
| Fuel Consumption gauge output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: White/Black | |
| Tachometer output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| A/C Compressor output (alternate: PWM GPO) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Blue | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Coil 1 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/White | |
| Coil 2 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Red | |
| Coil 3 output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Yellow | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| 12v Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Red/White | |
| Ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown | |
| 12v Switched Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Green | |
| Ignition Retard Input (alternate: Analog GPI) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Gray | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| 5v output Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Red/Yellow | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| A/C Console switch (alternate: Datalog enable) Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Violet/Gray | |
| A/C Pressure switch input Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black/Gray | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Knock 2 input Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| Knock 1 input Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Black | |
| Knock ground Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Orange | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| TPS Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Black | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label); alternate function: Analog GPI Cavity: Unknown |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| Intake Air Temp input Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Gray | |
| Water Temp input Cavity: Populated |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
Wire colour in the documented BMW loom: Brown/Red | |
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label); alternate function: Analog GPI Cavity: Unknown |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |
||
| NC (manual label) Cavity: Unused |
Confirmed Electromotive TECm User's Manual v1.0 (2013), section 7.4 |