Tuning Wiki
Applies to

Check the hardware and software limits stated in this article.

Connector pinout

The Electromotive TECm is a replacement motherboard fitted inside a Bosch Motronic 413 or 506 BMW ECU housing (including EWS versions), so it uses the original Motronic harness connector. The manufacturer's hardware manual (section 7.4) lists pins 1 to 88 of that connector with a primary function, an alternate function where the pin can be reassigned in WinTEC4, and the wire colour of the documented BMW loom. All 88 pins are given here; this is manufacturer documentation.

Power and ground: switched +12 V on pins 26 and 56, +12 V on pin 54, ECU relay control on pin 27, power grounds on pins 6, 15, 34 and 55, sensor grounds on pins 14, 28 and 44, shield ground on pin 45 and knock ground on pin 71; a 5 V sensor supply is on pin 59. Injector outputs 1 to 6 are on pins 33, 32, 31, 5, 3 and 4, and coil outputs 1 to 6 on pins 50, 51, 52, 23, 25 and 24. Crank sensor is on pins 16 (+) and 43 (−), cam sensor on pin 17, oxygen sensor on pins 13 (+) and 40 (−) with heater control on pin 38, knock inputs on pins 70 and 69, and TPS, air temperature and coolant temperature on pins 73, 77 and 78. Pin 41 is the MAF input (alternatively MAP).

NC is the manual's primary-function label; pins 9, 10, 76 and 81 are NC by default but list alternate PWM or analog functions. The manual does not show the connector face, so the diagram is a numbered pin index rather than a face view. Confirm the original ECU number, harness and TECm configuration before wiring.

Electromotive TECm 88-pin Motronic connector pin index
Electromotive TECm, 88-pin Motronic harness connector, pin index. Diagram redrawn by Tuning Wiki from the Electromotive TECm hardware manual.

Sources

Connector pinout

Applicability

Electromotive TECm replacement motherboard for Bosch Motronic 413 and 506 BMW ECUs (M50/S50 applications per the manufacturer). Pins 1-88 of the original Motronic harness connector as listed in the TECm hardware manual, section 7.4; manufacturer documentation. The manual does not show the connector face, so the diagram is a pin index. NC is the manual's primary-function label; pins 9, 10, 76 and 81 also list alternate functions. Wire colours describe the documented vehicle loom.

View orientation is stated beside each photograph. Unknown functions remain in the pin index.

Motronic harness connector (88 pins)

Redrawn pin index
View: Pin index; physical face layout and viewing side not shown in the source
Motronic harness connector (88 pins) — Redrawn pin index. Pin index; physical face layout and viewing side not shown in the source

Select a pin in a photograph or the index to highlight it.

Motronic harness connector (88 pins) — complete pin index
PinFunction / cavityConfidence / sourceNotes
Fuel Pump Output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Green
IAC Output (inverted) (alternate: PWM GPO)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Yellow
Injector 5 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Green
Injector 6 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Violet
Injector 4 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Blue
Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
Cam timing solenoid (alternate: PWM GPO)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Green/Blue
Check Engine Light output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Green
NC (manual label); alternate function: PWM GPO
Cavity: Unknown
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label); alternate function: Analog GPI
Cavity: Unknown
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

EGO +
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Yellow
Sensor Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
Crank Sensor +
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Yellow
Cam Sensor +
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Yellow
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Coil 4 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Blue
Coil 6 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Violet
Coil 5 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Green
+12v switched
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Red
ECU Relay Control
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
Sensor Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Orange
IAC Output (alternate: PWM GPO)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Green
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Injector 3 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Yellow
Injector 2 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Red
Injector 1 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/White
Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Evaporative Solenoid output (alternate: PWM GPO)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

O2 Sensor Heater Control
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Green
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

EGO -
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
MAF Input (alternate: MAP Input)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Gray/Yellow
Speed input (alternate: ON/OFF GPI)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/White
Crank Sensor -
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
Sensor Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
Shield Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Bare
Fuel Consumption gauge output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: White/Black
Tachometer output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
A/C Compressor output (alternate: PWM GPO)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Blue
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Coil 1 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/White
Coil 2 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Red
Coil 3 output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Yellow
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

12v
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Red/White
Ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown
12v Switched
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Green
Ignition Retard Input (alternate: Analog GPI)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Gray
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

5v output
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Red/Yellow
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

A/C Console switch (alternate: Datalog enable)
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Violet/Gray
A/C Pressure switch input
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black/Gray
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Knock 2 input
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
Knock 1 input
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Black
Knock ground
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Orange
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

TPS
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Black
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label); alternate function: Analog GPI
Cavity: Unknown
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Intake Air Temp input
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Gray
Water Temp input
Cavity: Populated
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

Wire colour in the documented BMW loom: Brown/Red
NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label); alternate function: Analog GPI
Cavity: Unknown
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4

NC (manual label)
Cavity: Unused
Confirmed

Electromotive TECm User's Manual v1.0 (2013), section 7.4