Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Siemens SID
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
K9K engine bay in a Dacia Duster
K9K 1.5 dCi engine bay in a Dacia Duster, one of the vehicles listed with SID301 and SID305. The ECU type is not identifiable in the photograph. Image: Turbojet, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID305 is a Continental (formerly Siemens VDO) common-rail diesel controller in the SID family. It is not a Bosch EDC or a Delphi DCM unit. The SID number is read from the controller label and diagnostic identification; it is not inferred from the engine.

Processor

Two tool vendors list SID305 with an Infineon TriCore TC1766 processor: the Abrites ECU programming tool manual (section 8, boot-mode connections, "Continental SID305 TC1766 (BSL only)", for Renault, Dacia and Mercedes-Benz) and AutoTuner's compatibility list (28 October 2026), which lists Siemens SID305/6 with TC1766. These are tool listings, not Continental documentation; flash and EEPROM part details are not given. Abrites manual; AutoTuner compatibility PDF.

Tool-listed applications

Alientech lists SID301 and SID305 together on Renault–Nissan K9K 1.5 dCi engines at 105 and 110 hp, in Renault Clio II, Mégane II and III, Scénic II, Kangoo II and Laguna II, Dacia Duster, Nissan Qashqai J10, Juke F15 and NV200. The announcement does not say which of those vehicles carries SID301 rather than SID305. Alientech, February 2022.

ECU file databases list SID305 mainly on Mégane III and Scénic III 1.5 dCi examples, but they are inconsistent with each other. Unverified: treat as indicative only.

Wikipedia attributes the higher-power K9K versions (95 PS and above) to Continental and lower-power versions to Delphi. Renault K-Type engine.

Identification limits

Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID305 does not transfer to SID301, SID307 or another SID number.

Connector pinout

The Abrites manual (section 8, page 131) contains a boot-mode connection diagram for SID305 that marks, on a three-connector ECU face, the cavities used for bench wiring. It is a tool vendor's bench-wiring illustration rather than a full connector pinout.

Related pages

Sources