
Identity
DCM 1.1 is the first generation in Delphi's diesel control-module table. Delphi's 2007 common-rail manual describes it as a 112-path controller with three connectors and 16-bit TRW electronics, built for Euro 3, and names Renault K9, Kia and Ford Lynx as its applications. DCU 1.1 and DCM 1.1 are the same series of names. See the Delphi DCM generation overview.
The following generation, DCM 1.2, has the same path count, connectors and 16-bit electronics but is listed for Euro 4 and for the Renault K9 only. The emissions standard and the label separate the two; their appearance does not.
On the K9K
The Euro 3 K9K 1.5 dCi was offered at 65, 80 and 100 PS, and Delphi supplied the injection system on the lower-power versions. Renault K-Type engine, Wikipedia. No source checked for this page states which early K9K codes or vehicles carry DCM 1.1 rather than DCM 1.2. Unverified: identify the generation from the controller label, not from the car's age or emissions standard.
The "Delphi DDCR" name
Tuning-tool makers often list early Delphi 1.5 dCi controllers as "Delphi DDCR" rather than by DCM generation. Alientech's 2021 K-Suite release lists Delphi DDCR on the Renault Clio, Kangoo, Kubistar, Mégane, Scénic, Grand Scénic and Thalia 1.5 dCi, the Nissan Almera N16 and Micra K12 1.5 dCi, and the Suzuki Jimny 1.5 DDiS, with read, write and clone support and an STMicroelectronics microcontroller. That listing does not give a DCM generation, so it covers DCM 1.1 and DCM 1.2 units without distinguishing them. Alientech K-Suite release 4.36.
Identification limits
Read the Delphi label and the diagnostic identification before choosing a file, tool protocol or injector procedure. Renault part numbers on early Delphi 1.5 dCi units commonly begin with R0410 in used-parts listings, for example R0410C078A on a Clio 1.5 dCi, but that prefix alone does not establish the generation. A file or procedure for DCM 1.2, including its injector correction coding, should not be assumed to apply to DCM 1.1.
Related pages
Sources
- Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007, DCU generation table, as recorded on the Delphi DCM overview. Mirror: DDGX200.
- Wikipedia, Renault K-Type engine, Euro 3 outputs and supplier statements. Accessed 19 November 2026. Secondary source.
- Alientech, K-Suite release 4.36, 19 May 2021, as republished by a tool reseller. Tool coverage, not a build record. Accessed 19 November 2026.