Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Siemens SID
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None

Changes from revision 2 to revision 4

Removed text is struck through; added text is highlighted.

K9K 1.5 dCi engine bay in a Dacia Duster, one of the vehicles listed with SID301 and SID305. The ECU type is not identifiable in the photograph. Image: Turbojet, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID301 is a Continental (formerly Siemens VDO) common-rail diesel controller in the SID family. It is not a Bosch EDC or a Delphi DCM unit. The SID number is read from the controller label and diagnostic identification; it is not inferred from the engine.

ProcessorAutoTuner's tool compatibility listing gives the Siemens SID301 a Freescale/NXP MPC561 microcontroller (PowerPC MPC5xx family). This is a tool-vendor listing, not manufacturer documentation; no flash or EEPROM part is stated.

Tool-listed applications

Alientech lists SID301 and SID305 together on Renault–Nissan K9K 1.5 dCi engines at 105 and 110 hp, in Renault Clio II, Mégane II and III, Scénic II, Kangoo II and Laguna II, Dacia Duster, Nissan Qashqai J10, Juke F15 and NV200. The announcement does not say which of those vehicles carries SID301 rather than SID305. Alientech, February 2022.

F-Autronica's car ECU list separately shows Siemens SID 301 on 1.5 dCi Renault models: Clio, Kangoo, Laguna, Mégane, Modus and Scénic, with read and write in flasher mode only (no boot mode listed). It gives no years or engine codes.

Wikipedia attributes the higher-power K9K versions (95 PS and above) to Continental and lower-power versions to Delphi. Renault K-Type engine. Lower-power K9K vehicles may therefore carry Delphi DCM 1.2 or DCM 3.4 instead.

Identification limits

Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID301 does not transfer to SID305 or another SID number. Read-method details are not recorded here until sourced; the full connector pinout is not established, and bench-connection pins are drawn in the linked bench connection pinout article.Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID301 does not transfer to SID305 or another SID number. Processor, connector and read-method details are not recorded here until sourced.

Related pages

Renault K9K 1.5 dCi tuning guideContinental SID305

Bench connection pinoutBench-connection pins for this unit are drawn in Continental SID301 bench connection pinout.

Sources

Alientech, New driver update for ECU Continental SID301 and SID305, 14 February 2022. Tool coverage, not a build record. Accessed 19 November 2026.Wikipedia, Renault K-Type engine, supplier statements. Accessed 19 November 2026. Secondary source.AutoTuner, ECU compatibility list, PDF export of 28 October 2026; Siemens SID301, MCU MPC561. Tool compatibility listing. Accessed 19 November 2026.F-Autronica, Car ECU list (serially reprogrammable ECUs), Siemens SID 301 entries. Tool compatibility listing, undated. Accessed 19 November 2026.Alientech, New driver update for ECU Continental SID301 and SID305, 14 February 2022. Tool coverage, not a build record. Accessed 19 November 2026.Wikipedia, Renault K-Type engine, supplier statements. Accessed 19 November 2026. Secondary source.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 2: Continental SID301
K9K engine bay in a Dacia Duster
K9K 1.5 dCi engine bay in a Dacia Duster, one of the vehicles listed with SID301 and SID305. The ECU type is not identifiable in the photograph. Image: Turbojet, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID301 is a Continental (formerly Siemens VDO) common-rail diesel controller in the SID family. It is not a Bosch EDC or a Delphi DCM unit. The SID number is read from the controller label and diagnostic identification; it is not inferred from the engine.

Tool-listed applications

Alientech lists SID301 and SID305 together on Renault–Nissan K9K 1.5 dCi engines at 105 and 110 hp, in Renault Clio II, Mégane II and III, Scénic II, Kangoo II and Laguna II, Dacia Duster, Nissan Qashqai J10, Juke F15 and NV200. The announcement does not say which of those vehicles carries SID301 rather than SID305. Alientech, February 2022.

Wikipedia attributes the higher-power K9K versions (95 PS and above) to Continental and lower-power versions to Delphi. Renault K-Type engine. Lower-power K9K vehicles may therefore carry Delphi DCM 1.2 or DCM 3.4 instead.

Identification limits

Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID301 does not transfer to SID305 or another SID number. Processor, connector and read-method details are not recorded here until sourced.

Related pages

Sources

Revision 4: Continental SID301
K9K engine bay in a Dacia Duster
K9K 1.5 dCi engine bay in a Dacia Duster, one of the vehicles listed with SID301 and SID305. The ECU type is not identifiable in the photograph. Image: Turbojet, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID301 is a Continental (formerly Siemens VDO) common-rail diesel controller in the SID family. It is not a Bosch EDC or a Delphi DCM unit. The SID number is read from the controller label and diagnostic identification; it is not inferred from the engine.

Processor

AutoTuner's tool compatibility listing gives the Siemens SID301 a Freescale/NXP MPC561 microcontroller (PowerPC MPC5xx family). This is a tool-vendor listing, not manufacturer documentation; no flash or EEPROM part is stated.

Tool-listed applications

Alientech lists SID301 and SID305 together on Renault–Nissan K9K 1.5 dCi engines at 105 and 110 hp, in Renault Clio II, Mégane II and III, Scénic II, Kangoo II and Laguna II, Dacia Duster, Nissan Qashqai J10, Juke F15 and NV200. The announcement does not say which of those vehicles carries SID301 rather than SID305. Alientech, February 2022.

F-Autronica's car ECU list separately shows Siemens SID 301 on 1.5 dCi Renault models: Clio, Kangoo, Laguna, Mégane, Modus and Scénic, with read and write in flasher mode only (no boot mode listed). It gives no years or engine codes.

Wikipedia attributes the higher-power K9K versions (95 PS and above) to Continental and lower-power versions to Delphi. Renault K-Type engine. Lower-power K9K vehicles may therefore carry Delphi DCM 1.2 or DCM 3.4 instead.

Identification limits

Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID301 does not transfer to SID305 or another SID number. Read-method details are not recorded here until sourced; the full connector pinout is not established, and bench-connection pins are drawn in the linked bench connection pinout article.

Related pages

Bench connection pinout

Bench-connection pins for this unit are drawn in Continental SID301 bench connection pinout.

Sources