Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Reference hub
Subject
Engine ECU
Parent
Siemens SID
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
None
K9K engine bay in a Dacia Duster
K9K 1.5 dCi engine bay in a Dacia Duster, one of the vehicles listed with SID301 and SID305. The ECU type is not identifiable in the photograph. Image: Turbojet, CC BY-SA 3.0, via Wikimedia Commons.

Identity

SID301 is a Continental (formerly Siemens VDO) common-rail diesel controller in the SID family. It is not a Bosch EDC or a Delphi DCM unit. The SID number is read from the controller label and diagnostic identification; it is not inferred from the engine.

Tool-listed applications

Alientech lists SID301 and SID305 together on Renault–Nissan K9K 1.5 dCi engines at 105 and 110 hp, in Renault Clio II, Mégane II and III, Scénic II, Kangoo II and Laguna II, Dacia Duster, Nissan Qashqai J10, Juke F15 and NV200. The announcement does not say which of those vehicles carries SID301 rather than SID305. Alientech, February 2022.

Wikipedia attributes the higher-power K9K versions (95 PS and above) to Continental and lower-power versions to Delphi. Renault K-Type engine. Lower-power K9K vehicles may therefore carry Delphi DCM 1.2 or DCM 3.4 instead.

Identification limits

Model, year and engine family do not identify the controller. Read the ECU label and its hardware and software identification before choosing a file, tool protocol or procedure. A file, checksum method or injector procedure for SID301 does not transfer to SID305 or another SID number. Processor, connector and read-method details are not recorded here until sourced.

Related pages

Sources