Scope the vehicle and the complaint
A modified Porsche 911 Turbo S with PDK may present an engine torque, air or fuel issue, a gearbox intervention, a clutch-control issue, or more than one problem at once. Identify model year, engine, gearbox and controller software, ECU and TCU calibration history, mechanical modifications and the conditions that reproduce the symptom.
Porsche's 992 Turbo S press kit describes an eight-speed PDK developed for that application. Porsche's separately documented SY 24/23 concerns a low-load first-to-second manual shift request on specified 2020–22 Turbo and Turbo S vehicles with G1G PDK; it does not diagnose a high-load power reduction. Check the exact VIN, mode, symptoms and software before considering any service bulletin.
Reported case: load mismatch and torque reduction around shifts
A workshop report on a 992 Turbo S with modified turbochargers, methanol injection and engine and PDK calibrations describes a requested-versus-reported load mismatch and a perceived torque reduction around shifts. Misfire was raised as a possible explanation for a lambda trace. Testing with methanol off and a non-meth calibration left the mismatch unchanged. A separate test detected induced misfires, and subsequent PDK logging led the workshop to suspect clutch slip and torque reduction. HP Academy forum discussion.
These are the workshop's interpretations, not a verified diagnosis: the underlying attachments require membership and were not independently reviewed, and the report does not establish a repair or prove that all similar symptoms come from the clutch. An absent detected misfire is not proof of perfect combustion under every condition.
Build a matched record
- Record complete faults, engine and PDK identities, installed hardware and calibration history before clearing faults or changing files. Establish whether the symptom occurs in a particular gear, mode, temperature or shift phase.
- Time-align defined engine channels such as pedal, load request and actual, throttle, boost, lambda, ignition and applicable misfire information with available PDK gear request and actual, clutch or shaft speeds, torque request and protection states. Verify channel meanings and sampling rates for the installed tools.
- Compare repeatable conditions and changes individually where practical. A load mismatch, lambda fluctuation or a torque request alone does not identify whether the cause is combustion, sensing, modelled torque, gearbox control or mechanical slip.
- Use current Porsche diagnostics and the builder's information for this vehicle. A factory bulletin for a different mode or condition and an unverified forum pressure value do not establish a tuning change.
See 992 PDK faults and diagnosis for the scope of SY 24/23 and other separate manufacturer examples. Sources reviewed 17 November 2026.