After the XU-powered cars covered in the classic GTI guide, Peugeot's small-hatch GTIs moved to the TU 1.6 sixteen-valve (106 GTI), the EW10 2.0 (206 GTi 180 / RC) and the turbocharged 1.6 THP (207 RC and GTI, 208 GTI, 308 GTI). Most public tuning information for these cars is tuner marketing or owner reports, and the figures differ between sources. This page records what is stated and flags how reliable each statement is. It is an orientation guide, not a set of tuning targets.
Engines and factory outputs
| Car | Engine | Factory output (as listed) | Source |
|---|---|---|---|
| 106 GTI, Saxo VTS, C2 VTS | TU5J4 (NFX), 1.6 16v, catalyst | 120 PS | Wikipedia: PSA TU engine |
| Lower-power 1.6 16v variant | TU5JP4 (NFU) | 110 PS | Same page |
| 106 Rallye | TU2J2/Z (MFZ), Magneti Marelli injection, catalyst | 100 PS | Same page |
| 206 GTi 180 (called 206 RC in European markets) | EW10J4S, 2.0 16v | 177 hp in tuner listings | Tuner listings |
| 207 RC and GTI THP | 1.6 THP (EP6DTS on the 175 hp car) | 175 hp | Tuner listings |
| 208 GTI | 1.6 THP | 200 and 208 hp variants | Tuner listings |
| 308 II GTI | 1.6 e-THP | 263 hp | Tuner listings |
The Wikipedia TU page does not list a 106 S16 and does not link these variants to ECU types, so check the ECU label on the actual car rather than assuming from the badge.
106 GTI and other TU cars
For the 106 and other TU 1.0 to 1.6 eight-valve engines, a vendor of throttle body kits states that the ECU must be remapped after a throttle body conversion. That is a vendor instruction, but the point is general: new airflow needs the fuel and ignition maps changed.
Vendor stage packages for the TU5J4 (106 GTI and Saxo VTS)
One UK supplier, Peugeot Tuning Parts, sells staged packages for the TU5J4. The power figures are the vendor's own typical results at the flywheel, with no independent verification, and none of the listings carry customer reviews.
| Package | Contents (vendor) | Quoted result |
|---|---|---|
| Stage 2 | Cat Cams 1321743 or Newman PH3 Ultimate Road cams, an ECU remap tuned for the package (the ECU is sent to the vendor), optional exhaust manifold | About 150 bhp at 7,700 rpm and 114 lb-ft at 6,000 rpm |
| Stage 3 | Newman PH3 cams, throttle bodies (AT Power direct-to-head or Jenvey ST45) with fuel rail, air horns and throttle position sensor, optional Emerald K6+ ECU, optional exhaust manifold. Aimed at a standard bottom end. | About 167 bhp at 7,700 rpm and 120 lb-ft at 6,300 rpm; dyno mapping stated as required |
| Stage 4 | Cat Cams 1321737 or Newman PH4 rally cams, valves and springs, forged high-compression pistons and rods, bearings, throttle bodies, 250 cc injectors, Emerald K6+ ECU | 185 to 195 bhp; dyno mapping stated as required, and the vendor recommends professional cam timing |
The stages show the shape of a typical TU5J4 build: cams and a remap first, throttle bodies and standalone management next, and a forged bottom end for the highest outputs. Owner reports are lower. Estimates in forum discussions put a mapped Cat Cams 1321743 set-up at roughly 155 to 160 bhp at the flywheel, and one owner reports 157.2 bhp on a TU5JP4 with a modified head, cams, a de-catted exhaust and an Adaptronic ECU. Those are self-reported and not verified. I did not find reliable dyno data on the NFX inlet manifold or standard exhaust for the 106 GTI itself.
106 Rallye
The Series 1 Rallye used the 1.3 TU2J2 and the Series 2 the 1.6 TU5J2, both with Magneti Marelli multipoint injection. A manufacturer-era table lists the 1993 to 1996 1.3 TU2J2L/Z (MFZ) with a Magneti Marelli 8P ECU. Retailers label some cam listings as TU24, which also cover the 1.3 Rallye, so check the engine code. One supplier lists a fast-road cam for the 1.3 Rallye with a 284 degree inlet duration and a claimed gain of 12 bhp; that is a vendor claim. I found no verified Rallye remap or piggyback data.
206 GTi 180 / RC
The EW10J4S car is a more highly tuned development of the 138 hp 2.0 engine, which is one reason owners say there is little to gain from simple bolt-ons. The following comes from vendor listings and a 2012 owner discussion on the 206 Info Exchange forum. These are anecdotes, not controlled tests.
- A cat-back exhaust is reported to add about 5 bhp. One owner went from a measured 169 bhp to 174 bhp with a cat-back, panel filter and remap.
- Induction kits get a poor report: one owner measured a loss of 12 bhp on rollers after fitting one, and others warn that kits can draw in warm air. A lower airbox with a panel filter is the more commonly recommended intake change.
- Cams are described as the only route to a worthwhile gain, though some owners report running problems with cams, and one reports about 195 hp with cams and the usual supporting modifications. A remap alone is described as variable between cars.
The Cat Cams 4901804 Ultimate Road cams are listed for the EW10J4S with variable valve timing. The listing gives 256 degrees duration at 0.1 mm (228 at 1.0 mm), lift of 10.75 mm inlet and 10.25 mm exhaust, a billet inlet cam drilled for the VVT, and a separate VVT-delete version (4902804). The vendor claims up to 17 bhp with a remap and says a remap is essential; its single listed review reports 172 to 191 ps, which is one anecdote. A second Cat Cams set, the 4901613 sport cam, is advertised by the same vendor at up to 23 bhp and 24 lb-ft with a remap or piggyback ECU. All of these are seller figures.
The only throttle body example found is a car on a Megasquirt ECU that went from 142 whp to 161.9 whp with individual throttle bodies and a remap. That is a single best run with a different ECU, not a clean comparison of the intake change.
207 RC, 208 GTI and 308 GTI THP
These turbocharged cars respond much more to software than the naturally aspirated ones. Vendor figures include:
- 207 RC / GTi THP 175: one tuner reports about 190 bhp from a measured 178 bhp, with an extra 25 bhp in the midrange. Another listing gives 175 hp rising to 205 hp on stage 1 and 230 hp on stage 2.
- A general 207 guide lists a sports exhaust, panel filter and remap as a typical first step and says a remap gives the best value.
- Tuners also list stage 1 files for the 208 GTI 1.6 THP in both 200 and 208 hp forms and for the 308 GTI 1.6 e-THP 263.
These are marketing figures. Boost, fuelling, knock and intake temperature at the point of measurement matter far more than a headline number. For engine-specific diagnosis and Bosch MED17 details, see the PSA 1.6 THP MED17 tuning guide, and for ECU identification see the PSA ECU identification and tuning guide.
Reading tuning claims on these cars
- Check what the figure is: wheel or flywheel, corrected or uncorrected, same rolling road before and after.
- A remap sold as generic rather than mapped to the individual car is generally expected to give less than a rolling-road map.
- Vendor packages that depend on dyno mapping give their best figures only after that mapping, so a bolt-on kit without it should not be expected to match the quoted result.
- Keep the original ECU read and know how to restore it before writing anything.
- Gaps: public sources for the 106 GTI standard intake and exhaust and for independent 206 GTi 180 cam results were thin. If you have dyno sheets, part numbers or workshop data for these engines, they would improve this page.
Related pages
- Peugeot GTI tuning guide: 205, 309, 405 Mi16 and 306 S16 XU engines
- PSA 1.6 THP MED17 tuning guide
- PSA ECU identification and tuning guide
Sources
- Wikipedia: PSA TU engine
- Peugeot Tuning Parts: 106 GTI Stage 2 package
- Peugeot Tuning Parts: 106 GTI Stage 3 package
- Peugeot Tuning Parts: 106 GTI Stage 4 package
- Peugeot Tuning Parts: Cat Cams 4901804 for the 206 GTI 180 / RC
- Oreca Store: Cat Cams for TU5J2/TU24 (106 Rallye)
- Vendor throttle body kit for TU 1.0 to 1.6 8v engines
- 206 Info Exchange: 206 GTi 180 performance discussion (2012)
- Tuner listing: 206 2.0 16v GTi
- General 207 tuning guide
- Superchips 207 GTi THP upgrade report
- Tuner listing: 207 RC 1.6 THP
- Tuner listing: 208 GTI 1.6 THP