Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Engine ECU
Parent
Section level
Applies to
Maserati Biturbo
Tool groups
None
Manufacturers
None

Changes from revision 3 to revision 4

Removed text is struck through; added text is highlighted.

These part numbers were read from scanned plates of the factory parts catalogue for the 18-valve and 24-valve V6 engines (a UTEM-printed catalogue dated 1991, reproduced on an enthusiast site). The catalogue marks which engine each part fits in columns headed with engine codes. The marks were read by enlarging the scans, so the engine assignments below come from measured positions on the images, but they are still transcribed from a low-resolution scan: verify against the catalogue or the part itself before buying.

Engine-code columns used by the catalogue

Seven columns appear: 477, 496, 495, 490, 475, 473 and 471. From the plate titles: 475 = 2.24v/4.24v 2.0 four-valve; 477 = 2.8 four-valve (222 4v, 430 4v); 490 = Racing; 496 and 495 = the Ghibli engines (the plate titled "Ghibli and Ghibli potenziato"); 473 = 2.8 three-valve; 471 = 2.0 three-valve. This agrees with AM 475, 477, 490, 473 and 471 elsewhere on this wiki and with AM 496 for the Ghibli 2.0. It disagrees with AM 574 given for the Ghibli 2.8 in an encyclopaedia entry, so confirm engine codes from the engine plate.

Control units, 4-valve engines (plate 16)

Engine codeMarelli ignition unitWeber injection unitEmissions 475 (2.24v / 4.24v)313253107313753150Not catalysed 477 (2.8 four-valve)313258107313758150Catalysed 495 and 490 (shared unit)313252107313752150Not catalysed 496 (Ghibli 2.0)363201100363701100Unmarked

ItemPart numbers Injection wiring harness, 4-valve363700101 (496 and 495); 313753153; 313752154 (left-hand drive); 313769155 (right-hand drive) Minimum (idle CO) tamper-proof plug, black313720336 (the sealed CO adjusting screw cover) Ignition coil, single type for Ghibli engines363200109 (quantity 2, marked against 496 and 495)

Control units, 3-valve engines (plate 16.1)

Engine codeMarelli ignition boxWeber injection boxEmissions 473 (2.8 three-valve)323260107323760150Catalysed 473 (2.8 three-valve)343200107343700150Not catalysed 471 (2.0 three-valve)313222107313722150Not catalysed

ItemPart numbers Injection wiring harness323760151 (left-hand drive); 313747152 (right-hand drive); both engines Distributor313220219 (bracket 313220406) Ignition coils A and B313220110 and 313220111 Spark plugsNGK BP8ES 313220224; Champion N6YCC 393200224

Ignition and sensors, 4-valve engines (plate 16)

Distributor 313253219 and distributor cover 313220221; rotating brush (rotor) 313220222. Knock sensor 313220112. Ignition coils A and B 313220110 and 313220111; alternative coils 313253110 and 313253111. Electromagnetic (crank and cam pick-up) sensors 313720120 and 313753120, with support 313720317. Spark plugs: NGK DCPR 8E 313253225 (alternative CND0097219), Champion RA4GHC 313253223 (alternative CND0097143); six per engine; spark plug extensions 313253226. Plug lead, plug and coil assembly 490981800.

Fuel injection hardware, 4-valve engines (plates 20 and 20.1)

PartPart number Injector (6 per engine)313720121 (retaining spring 313720313) Intake air temperature sensor313720116 Absolute (manifold) pressure sensor313720118 Air modulating solenoid valve (idle air)313737125 Fuel pressure regulator, 2.24v/430 4v group319253140 or 349202140 Fuel pressure regulator, Ghibli group477073600 or 475073600 Fuel rails, 2.24v group312053494 (right) and 312053490 (left); 495060000 and 495060100 on other versions Fuel delivery pipes, Ghibli479064203 (delivery pipe), 495060700 (left return pipe), 495061000 (right delivery pipe) Injector union312020488

Boost control (plates 15 and 15.1)

MABC solenoid valve: 313320163, with solenoid support 313753110 (4-valve). Boost relay 313320134 and relay with fuse 313320106 (two per car); relay supports 313753109 (left-hand drive) and 313369168 (right-hand drive) on 4-valve cars. Wastegate connection pipe assemblies: 490948900 and 495948900 (right-hand turbo connection), 490948800 and 495948800 (left and right wastegate connection). Knock sensor 313220112 also appears on the 3-valve boost plate; the identification clamps are lettered W, C and R to match the W, C and R ports of the solenoid. The 3-valve plate uses the same solenoid valve number with pipe assemblies 490948800 and 490948900.

Turbochargers (plate 13)

Engine codeRight-hand turboLeft-hand turboNotes 471 (2.0 three-valve)312020024312020023– 473 (2.8 three-valve)342000004342000003– 475 (2.24v)312053026; 475360040312053029; 475360140312053026 and 312053029 are listed with a 19 mm wastegate hole (not catalysed); 475360040 and 475360140 are the catalysed pair 477 (2.8 four-valve)342002004342002003– 490 (Racing)312052026312052029– 496 (Ghibli 2.0)496360001496360101Catalysed

The water supply and return pipes for the turbo cooling circuit are 312020138 and 312020137 (supply) and 312020124 and 312020122 (returns).

Processor and memory (single-source lead)A post in a Biturbo owners' group describes an ECU taken from a 2.24v / Ghibli II series-1 car (1991–1994) as an IAW 04/3C with a 6803-family processor and an EPROM. This is one anecdote, not a verified specification, and it concerns the later 24-valve generation; the EPROM type, size and map layout are not confirmed. Generic references describe 27C256 (32 kB) EPROMs as the usual memory of this period, but no Biturbo-specific chip or socket layout has been found. Commercial tuners say pre-2000 Maseratis need the ECU removed for a read, modify and write chip-tuning process.

What is still missing

Connector pin lists, EPROM type and map data for these control units. A clearer reading of the 495 column; its marks are shared with the Racing on some plates, so treat the 495/490 shared unit as a lead. Shamal V8 and Quattroporte IV service data. A Shamal workshop manual with specifications and wiring diagrams is advertised by a parts reseller but no figures from it are available; no timing drive interval for the Quattroporte IV V8 has been found. The 3200 GT era units are outside this wiki's scope.Connector pin lists and map data for these control units. A clearer reading of the 495 column; its marks are shared with the Racing on some plates, so treat the 495/490 shared unit as a lead. The 3200 GT era units are outside this wiki's scope.

References

Enrico's Maserati Pages: engine parts catalogue index Factory manuals and parts catalogues listing Biturbozentrum ECU discussionEnrico's Maserati Pages: engine parts catalogue index Factory manuals and parts catalogues listing

Related: fuelling and ECU, injected-car engine management, Maserati Biturbo hub.

Rendered revisions

Open each version to inspect formatting, tables and photographs.

Revision 3: Maserati Biturbo V6 ECU, sensor and turbo part numbers from the factory parts catalogue

These part numbers were read from scanned plates of the factory parts catalogue for the 18-valve and 24-valve V6 engines (a UTEM-printed catalogue dated 1991, reproduced on an enthusiast site). The catalogue marks which engine each part fits in columns headed with engine codes. The marks were read by enlarging the scans, so the engine assignments below come from measured positions on the images, but they are still transcribed from a low-resolution scan: verify against the catalogue or the part itself before buying.

Engine-code columns used by the catalogue

Seven columns appear: 477, 496, 495, 490, 475, 473 and 471. From the plate titles: 475 = 2.24v/4.24v 2.0 four-valve; 477 = 2.8 four-valve (222 4v, 430 4v); 490 = Racing; 496 and 495 = the Ghibli engines (the plate titled "Ghibli and Ghibli potenziato"); 473 = 2.8 three-valve; 471 = 2.0 three-valve. This agrees with AM 475, 477, 490, 473 and 471 elsewhere on this wiki and with AM 496 for the Ghibli 2.0. It disagrees with AM 574 given for the Ghibli 2.8 in an encyclopaedia entry, so confirm engine codes from the engine plate.

Control units, 4-valve engines (plate 16)

Engine codeMarelli ignition unitWeber injection unitEmissions
475 (2.24v / 4.24v)313253107313753150Not catalysed
477 (2.8 four-valve)313258107313758150Catalysed
495 and 490 (shared unit)313252107313752150Not catalysed
496 (Ghibli 2.0)363201100363701100Unmarked
ItemPart numbers
Injection wiring harness, 4-valve363700101 (496 and 495); 313753153; 313752154 (left-hand drive); 313769155 (right-hand drive)
Minimum (idle CO) tamper-proof plug, black313720336 (the sealed CO adjusting screw cover)
Ignition coil, single type for Ghibli engines363200109 (quantity 2, marked against 496 and 495)

Control units, 3-valve engines (plate 16.1)

Engine codeMarelli ignition boxWeber injection boxEmissions
473 (2.8 three-valve)323260107323760150Catalysed
473 (2.8 three-valve)343200107343700150Not catalysed
471 (2.0 three-valve)313222107313722150Not catalysed
ItemPart numbers
Injection wiring harness323760151 (left-hand drive); 313747152 (right-hand drive); both engines
Distributor313220219 (bracket 313220406)
Ignition coils A and B313220110 and 313220111
Spark plugsNGK BP8ES 313220224; Champion N6YCC 393200224

Ignition and sensors, 4-valve engines (plate 16)

  • Distributor 313253219 and distributor cover 313220221; rotating brush (rotor) 313220222.
  • Knock sensor 313220112.
  • Ignition coils A and B 313220110 and 313220111; alternative coils 313253110 and 313253111.
  • Electromagnetic (crank and cam pick-up) sensors 313720120 and 313753120, with support 313720317.
  • Spark plugs: NGK DCPR 8E 313253225 (alternative CND0097219), Champion RA4GHC 313253223 (alternative CND0097143); six per engine; spark plug extensions 313253226.
  • Plug lead, plug and coil assembly 490981800.

Fuel injection hardware, 4-valve engines (plates 20 and 20.1)

PartPart number
Injector (6 per engine)313720121 (retaining spring 313720313)
Intake air temperature sensor313720116
Absolute (manifold) pressure sensor313720118
Air modulating solenoid valve (idle air)313737125
Fuel pressure regulator, 2.24v/430 4v group319253140 or 349202140
Fuel pressure regulator, Ghibli group477073600 or 475073600
Fuel rails, 2.24v group312053494 (right) and 312053490 (left); 495060000 and 495060100 on other versions
Fuel delivery pipes, Ghibli479064203 (delivery pipe), 495060700 (left return pipe), 495061000 (right delivery pipe)
Injector union312020488

Boost control (plates 15 and 15.1)

  • MABC solenoid valve: 313320163, with solenoid support 313753110 (4-valve).
  • Boost relay 313320134 and relay with fuse 313320106 (two per car); relay supports 313753109 (left-hand drive) and 313369168 (right-hand drive) on 4-valve cars.
  • Wastegate connection pipe assemblies: 490948900 and 495948900 (right-hand turbo connection), 490948800 and 495948800 (left and right wastegate connection).
  • Knock sensor 313220112 also appears on the 3-valve boost plate; the identification clamps are lettered W, C and R to match the W, C and R ports of the solenoid.
  • The 3-valve plate uses the same solenoid valve number with pipe assemblies 490948800 and 490948900.

Turbochargers (plate 13)

Engine codeRight-hand turboLeft-hand turboNotes
471 (2.0 three-valve)312020024312020023–
473 (2.8 three-valve)342000004342000003–
475 (2.24v)312053026; 475360040312053029; 475360140312053026 and 312053029 are listed with a 19 mm wastegate hole (not catalysed); 475360040 and 475360140 are the catalysed pair
477 (2.8 four-valve)342002004342002003–
490 (Racing)312052026312052029–
496 (Ghibli 2.0)496360001496360101Catalysed

The water supply and return pipes for the turbo cooling circuit are 312020138 and 312020137 (supply) and 312020124 and 312020122 (returns).

What is still missing

  • Connector pin lists and map data for these control units.
  • A clearer reading of the 495 column; its marks are shared with the Racing on some plates, so treat the 495/490 shared unit as a lead.
  • The 3200 GT era units are outside this wiki's scope.

References

Related: fuelling and ECU, injected-car engine management, Maserati Biturbo hub.

Revision 4: Maserati Biturbo V6 ECU, sensor and turbo part numbers from the factory parts catalogue

These part numbers were read from scanned plates of the factory parts catalogue for the 18-valve and 24-valve V6 engines (a UTEM-printed catalogue dated 1991, reproduced on an enthusiast site). The catalogue marks which engine each part fits in columns headed with engine codes. The marks were read by enlarging the scans, so the engine assignments below come from measured positions on the images, but they are still transcribed from a low-resolution scan: verify against the catalogue or the part itself before buying.

Engine-code columns used by the catalogue

Seven columns appear: 477, 496, 495, 490, 475, 473 and 471. From the plate titles: 475 = 2.24v/4.24v 2.0 four-valve; 477 = 2.8 four-valve (222 4v, 430 4v); 490 = Racing; 496 and 495 = the Ghibli engines (the plate titled "Ghibli and Ghibli potenziato"); 473 = 2.8 three-valve; 471 = 2.0 three-valve. This agrees with AM 475, 477, 490, 473 and 471 elsewhere on this wiki and with AM 496 for the Ghibli 2.0. It disagrees with AM 574 given for the Ghibli 2.8 in an encyclopaedia entry, so confirm engine codes from the engine plate.

Control units, 4-valve engines (plate 16)

Engine codeMarelli ignition unitWeber injection unitEmissions
475 (2.24v / 4.24v)313253107313753150Not catalysed
477 (2.8 four-valve)313258107313758150Catalysed
495 and 490 (shared unit)313252107313752150Not catalysed
496 (Ghibli 2.0)363201100363701100Unmarked
ItemPart numbers
Injection wiring harness, 4-valve363700101 (496 and 495); 313753153; 313752154 (left-hand drive); 313769155 (right-hand drive)
Minimum (idle CO) tamper-proof plug, black313720336 (the sealed CO adjusting screw cover)
Ignition coil, single type for Ghibli engines363200109 (quantity 2, marked against 496 and 495)

Control units, 3-valve engines (plate 16.1)

Engine codeMarelli ignition boxWeber injection boxEmissions
473 (2.8 three-valve)323260107323760150Catalysed
473 (2.8 three-valve)343200107343700150Not catalysed
471 (2.0 three-valve)313222107313722150Not catalysed
ItemPart numbers
Injection wiring harness323760151 (left-hand drive); 313747152 (right-hand drive); both engines
Distributor313220219 (bracket 313220406)
Ignition coils A and B313220110 and 313220111
Spark plugsNGK BP8ES 313220224; Champion N6YCC 393200224

Ignition and sensors, 4-valve engines (plate 16)

  • Distributor 313253219 and distributor cover 313220221; rotating brush (rotor) 313220222.
  • Knock sensor 313220112.
  • Ignition coils A and B 313220110 and 313220111; alternative coils 313253110 and 313253111.
  • Electromagnetic (crank and cam pick-up) sensors 313720120 and 313753120, with support 313720317.
  • Spark plugs: NGK DCPR 8E 313253225 (alternative CND0097219), Champion RA4GHC 313253223 (alternative CND0097143); six per engine; spark plug extensions 313253226.
  • Plug lead, plug and coil assembly 490981800.

Fuel injection hardware, 4-valve engines (plates 20 and 20.1)

PartPart number
Injector (6 per engine)313720121 (retaining spring 313720313)
Intake air temperature sensor313720116
Absolute (manifold) pressure sensor313720118
Air modulating solenoid valve (idle air)313737125
Fuel pressure regulator, 2.24v/430 4v group319253140 or 349202140
Fuel pressure regulator, Ghibli group477073600 or 475073600
Fuel rails, 2.24v group312053494 (right) and 312053490 (left); 495060000 and 495060100 on other versions
Fuel delivery pipes, Ghibli479064203 (delivery pipe), 495060700 (left return pipe), 495061000 (right delivery pipe)
Injector union312020488

Boost control (plates 15 and 15.1)

  • MABC solenoid valve: 313320163, with solenoid support 313753110 (4-valve).
  • Boost relay 313320134 and relay with fuse 313320106 (two per car); relay supports 313753109 (left-hand drive) and 313369168 (right-hand drive) on 4-valve cars.
  • Wastegate connection pipe assemblies: 490948900 and 495948900 (right-hand turbo connection), 490948800 and 495948800 (left and right wastegate connection).
  • Knock sensor 313220112 also appears on the 3-valve boost plate; the identification clamps are lettered W, C and R to match the W, C and R ports of the solenoid.
  • The 3-valve plate uses the same solenoid valve number with pipe assemblies 490948800 and 490948900.

Turbochargers (plate 13)

Engine codeRight-hand turboLeft-hand turboNotes
471 (2.0 three-valve)312020024312020023–
473 (2.8 three-valve)342000004342000003–
475 (2.24v)312053026; 475360040312053029; 475360140312053026 and 312053029 are listed with a 19 mm wastegate hole (not catalysed); 475360040 and 475360140 are the catalysed pair
477 (2.8 four-valve)342002004342002003–
490 (Racing)312052026312052029–
496 (Ghibli 2.0)496360001496360101Catalysed

The water supply and return pipes for the turbo cooling circuit are 312020138 and 312020137 (supply) and 312020124 and 312020122 (returns).

Processor and memory (single-source lead)

A post in a Biturbo owners' group describes an ECU taken from a 2.24v / Ghibli II series-1 car (1991–1994) as an IAW 04/3C with a 6803-family processor and an EPROM. This is one anecdote, not a verified specification, and it concerns the later 24-valve generation; the EPROM type, size and map layout are not confirmed. Generic references describe 27C256 (32 kB) EPROMs as the usual memory of this period, but no Biturbo-specific chip or socket layout has been found. Commercial tuners say pre-2000 Maseratis need the ECU removed for a read, modify and write chip-tuning process.

What is still missing

  • Connector pin lists, EPROM type and map data for these control units.
  • A clearer reading of the 495 column; its marks are shared with the Racing on some plates, so treat the 495/490 shared unit as a lead.
  • Shamal V8 and Quattroporte IV service data. A Shamal workshop manual with specifications and wiring diagrams is advertised by a parts reseller but no figures from it are available; no timing drive interval for the Quattroporte IV V8 has been found.
  • The 3200 GT era units are outside this wiki's scope.

References

Related: fuelling and ECU, injected-car engine management, Maserati Biturbo hub.