This black Ferrari 348 was bought standard and developed over several years with F355 wheels, 360 seats and a 360 Challenge steering wheel. A later project acquired a 348-based race engine associated with a Le Mans programme, with an owner-reported engine-dyno output of 480 bhp, intended for road use with a MoTeC M800 ECU.


Photographs shared by Angelis in the PistonHeads build thread, reproduced with permission.
Chassis, interior and servicing
- 18-inch F355 magnesium wheels with 15 mm front and 25 mm rear spacers.
- 360 carbon-fibre seats and a 360 Challenge steering wheel.
- Engine-out service, upgraded ignition leads and silicone hoses.
- Complete respray from metallic black to solid black.
Le Mans engine project
A 348-based race engine associated with a Le Mans programme was acquired, with an engine-dyno output of 480 bhp reported by the owner (unverified). The plan is to adapt it for road use with a MoTeC M800. The build thread records setbacks, so the purchase and intended installation should be read as a stage of the project rather than a completed conversion.