Tuning Wiki
Browse Ferrari

This black Ferrari 348 was bought standard and developed over several years with F355 wheels, 360 seats and a 360 Challenge steering wheel. A later project acquired a 348-based race engine associated with a Le Mans programme, with an owner-reported engine-dyno output of 480 bhp, intended for road use with a MoTeC M800 ECU.

Front three-quarter view of Angelis’s black Ferrari 348 after its respray

Rear view of Angelis’s black Ferrari 348 after its respray

Photographs shared by Angelis in the PistonHeads build thread, reproduced with permission.

Chassis, interior and servicing

  • 18-inch F355 magnesium wheels with 15 mm front and 25 mm rear spacers.
  • 360 carbon-fibre seats and a 360 Challenge steering wheel.
  • Engine-out service, upgraded ignition leads and silicone hoses.
  • Complete respray from metallic black to solid black.

Le Mans engine project

A 348-based race engine associated with a Le Mans programme was acquired, with an engine-dyno output of 480 bhp reported by the owner (unverified). The plan is to adapt it for road use with a MoTeC M800. The build thread records setbacks, so the purchase and intended installation should be read as a stage of the project rather than a completed conversion.

Sources