DCM is the generation
In Delphi's September 2007 common-rail manual, DCM means diesel control module. The generation number is the hardware generation. DCU 1.1 and the DCM 1.1 on a label are the same series of names. The manual's table gives the path count, the electronics, the emissions standard and the applications as Delphi stated them then. A later car can carry a number from this table on a different engine. The label and the software still have to match.
| Generation | Paths | Electronics | Standard | Applications named in the 2007 table |
|---|---|---|---|---|
| 1.1 | 112, three connectors | TRW, 16-bit | Euro 3 | Renault K9, Kia, Ford Lynx |
| 1.2 | 112, three connectors | TRW, 16-bit | Euro 4 | Renault K9 |
| 2.1 | 112, three connectors | TRW, 32-bit | Euro 3 | PSA DV4 TED4 |
| 3.1 | 121, one connector | Delco, 32-bit | Euro 3 and Euro 4 | Ford and SsangYong |
| 3.2 | 154, two connectors | Delco, 32-bit | Euro 4 | DaimlerChrysler OM646 |
| 3.3 | 124, two connectors | Delco, 32-bit | Tier 3 | JCB |
| 3.4 | 128, three connectors | Delco, 32-bit | Euro 4 and Euro 5 | PSA DW10B and Renault K9 Euro 5 |
| 3.5 | 154, three connectors | Delco, 32-bit | Euro 5 | PSA DW10C and DaimlerChrysler OM651, solenoid injectors |
| 4.1 | 154, two connectors | Delco, 32-bit | Euro 5, piezo injector | DaimlerChrysler OM651, piezo |
TRW and Delco in that table are the electronics named for the generation. They do not move the controller into another manufacturer's wiki. Generation 1.2 is 16-bit. From 3.1 the table is 32-bit Delco. Generation 4.1 is the piezo OM651. Generation 3.5 is the solenoid OM651 and the PSA DW10C. A piezo file does not belong on the solenoid controller.
Where a later list disagrees
Mecaprog, a repairer, assigns the numbers differently for the cars it sees. DCM 1.2 is the Renault, Dacia and Nissan 1.5 dCi of 2004 to 2011, which agrees with the manual's Renault K9 row. DCM 3.4 in that list is the later 1.5 dCi, Euro 5 and Euro 6, and it does not mention the DW10B. DCM 3.5 in that list is the Peugeot and Citroën 1.4 and 1.6 HDi and the Ford 1.4 and 1.6 TDCi. The 2007 table puts the DV4 TED4 on generation 2.1 and the DW10C on generation 3.5. Those two accounts are not the same map. Use the 2007 table for what Delphi printed, and use the label on the controller for the car.
The same repairer puts DCM 6.2 and DCM 7.1 on the 1.5 and 1.6 BlueHDi and on the Ford 1.5 TDCi, and describes those two as locked against an ordinary diagnostic read. Tool support changes, and the exact suffix, vehicle and protocol matter; AutoTuner lists OBD access for some DCM6.2 configurations, so the repairer's statement should not be treated as a universal limitation. They are not in the 2007 table. Ford's 2016 Kuga specification says the 2.0 TDCi of 150 and 180 PS uses Delphi engine management and the 1.5 TDCi of 120 PS uses Bosch. That document does not give a DCM number, so the Kuga 2.0 is not assumed to be a 6.2.
Alientech's former coverage page listed "DCM3.5 - CRD2" for the Mercedes Sprinter and the Jeep Compass and Patriot, which is the OM651 side of generation 3.5, not the repairer's 1.6 HDi. That name is on Delphi CRD.
Family guides
- DCM 1.1: first-generation Euro 3 controller and the Delphi DDCR tool name.
- DCM 1.2: Renault K9K diagnostic and injector coding examples.
- DCM 3.4: application and processor evidence.
- DCM3.7 and DCM3.7AP: road and off-highway examples.
- DCM6.1 and DCM6.2: suffixes, processor and vehicle examples.
Sources
- Delphi France SAS, Common Rail Manual DDGX200(EN), issue 1, September 2007. The generation table, path counts, TRW and Delco, and the applications. Mirror: DDGX200. Accessed 2026-11-13.
- Mecaprog, Delphi DCM repair notes. Later assignments for 1.2, 3.4, 3.5, 6.2 and 7.1. Mecaprog DCM. Accessed 2026-11-13.
- Ford of Europe, Kuga technical specifications, October 2016. Delphi on the 2.0 TDCi 150 and 180, Bosch on the 1.5 TDCi, no generation number. Kuga specifications.
- Alientech, historical ECU version DCM3.5 - CRD2 listing: the previously consulted page is no longer available. A separate Alientech K-Suite 2.32 list: Jeep Compass and Jeep Patriot (PDF, 20 MB) show DCM3.5 - CRD2 examples; its rows do not establish every detail of the former listing.
- AutoTuner DCM6.2A: tool-specific OBD and boot coverage; accessed 17 November 2026.