Page organisation in this revision
- Page type
- Technical article
- Subject
- Modded Cars
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Alfa Romeo
Changes from revision 2 to revision 2
Removed text is struck through; added text is highlighted.
Track preparation
This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.
The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.
Varano and exhaust development
The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.
Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.
Sources
ClubAlfa.it thread: track build and engine-bay galleryClubAlfa.it thread: Varano photos and track-day reportClubAlfa.it thread: Supersprint manifolds and silencer update
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 2: Cristian’s E.C.P. Team Alfa Romeo 147 GTA 3.2 V6
Track preparation
This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.
The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.
Varano and exhaust development
The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.


Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.
Sources
Revision 2: Cristian’s E.C.P. Team Alfa Romeo 147 GTA 3.2 V6
Track preparation
This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.
The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.
Varano and exhaust development
The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.


Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.
Sources