Tuning Wiki
Browse Alfa Romeo

Track preparation

This Alfa Romeo 147 GTA 3.2 V6 was bought used with 45,000 km and prepared for track days. The 3.2 V6 has an ECU remap and a carbon intake with silicone hoses. Other fitted parts are a reinforced clutch, adjustable Bilstein suspension, Pagid pads, braided brake lines and drilled and grooved discs.

The front lip came from the 147 GTA Cup. Cadamuro supplied the carbon mirror covers and rear wing. The bonnet wears carbon-look film to protect it from stone chips.

Varano and exhaust development

The car ran in its dotted livery at Varano in 2010, where a failed left-side joint ended the day. A later exhaust revision added Supersprint manifolds and two small silencers, because the four-outlet Ragazzon rear silencer alone left the car too loud for everyday driving.

The 147 GTA with the bonnet raised over the V6

Cristian’s 147 GTA in its dotted Varano livery

Photographs shared by cristian.pet. on ClubAlfa.it and reproduced with permission.

Sources