Page organisation in this revision
- Page type
- Technical article
- Subject
- Renault Tuning
- Parent
- Section level
- Applies to
- No ECU-specific applicability
- Tool groups
- None
- Manufacturers
- Continental, Renault, Sagem, Siemens
Changes from revision 3 to revision 3
Removed text is struck through; added text is highlighted.
Why identification comes first
Tuning tools support one ECU and software family at a time, and file-catalogue names are often loose. A Megane, for instance, can carry a Sagem, a Siemens or a Continental petrol controller depending on generation and engine. The label and software identifiers should be read and the exact unit matched to the tool.
Families in the sources
FamilyMakerTypical Renault applications named by sourcesNote
SafirSagemEarly Renault petrol multipointEarlier semi-sequential design
S2000SagemClio II (1.2 to 1.6), Twingo, Kangoo, Laguna, Megane/Scenic, Espace, Vel Satis, 1998 to 2012; Clio III 1.6 16v per a DAMOS listing112-track on the Laguna; C167 MCU per AutoTuner; several sub-variants (PM2, RPM, PL4FC5)
S3000SagemMegane II phase 2, Scenic II, Clio III RS, Modus (K4J, K4M, F4R, F4R-T)128-track flash, torque structure; a 65,536-byte file is listed for a Megane RS
SIRIUS 32 / 34SiemensClio II RS 172 (SIRIUS 32) and 182 (SIRIUS 34) per tuner listings, which disagree with each otherNot Sagem. Clio 172/182 information concerns a Siemens car and does not apply to the S2000; see the Sirius tuning guide
SIM32Siemens1.2 16v petrol Renaults, 2005 to 2014 per a remanufacturerA separate Siemens design, not Sagem
EMS3132SiemensRenault/Dacia petrol (immobiliser listings)Not Sagem; no remap method verified
EMS3150 / EMS3155ContinentalClio IV RS (EMS3150 on the EDC car, EMS3155 TC1782 on the 1.6T), Mk3 and later Megane RSNewer generation; boot access per Abrites tables
Checks before buying a tool licence
Match the engine code, ECU label and software number with the vendor list, not just the model name.
Check whether the vendor lists OBD or bench/boot access for that exact unit, and whether the immobiliser is involved.
Do not assume that a Sagem file or tool works on a Siemens or Continental unit with a similar part number.
Compare the length of the read with the file listing. Checksum plugins treat different Sagem file lengths as different cases, see files, checksums and WinOLS map packs.
For the Sagem vendor evidence see Sagem S2000 and S3000 tuning tool support. For the Siemens non-BMW family see Siemens petrol outside BMW and Simos.
Evidence limits
The table is compiled from tool-vendor and file-catalogue listings, not from ECU teardowns. The microcontrollers of the EMS3132 and SIM32 are unconfirmed, and the Megane RS Mk3 ECU designation is supported only by tuner listings (EMS3150 and later EMS3155 are named for the Clio IV RS). The Clio II RS SIRIUS designations come from tuner listings that disagree, with SIRIUS 32 for the 172 and SIRIUS 34 for the 182 in one case, so the ECU label should be used to confirm.
Sources
AutoTuner: Sagem S2000, accessed 2026-11-19.
ECU Testing: Siemens SIM32, via search summary 2026-11-19.
CarLabImmo: EMS3132 listing, accessed 2026-11-19.
CSC Motors: Clio RS 1.6T EMS3155, accessed 2026-11-19.
Abrites compatibility list (Clio RS EMS3155 TC1782), accessed 2026-11-19.
Chiptuningreseller: Clio 2 RS 2.0 16v, via search summary 2026-11-19.
ND Auto Repairs: Clio 2 RS 172, via search summary 2026-11-19.
EVC: OLS283 checksum plugin, accessed 2026-11-19.
Rendered revisions
Open each version to inspect formatting, tables and photographs.
Revision 3: Renault engine ECU families: Sagem, Siemens and Continental identification
Why identification comes first
Tuning tools support one ECU and software family at a time, and file-catalogue names are often loose. A Megane, for instance, can carry a Sagem, a Siemens or a Continental petrol controller depending on generation and engine. The label and software identifiers should be read and the exact unit matched to the tool.
Families in the sources
| Family | Maker | Typical Renault applications named by sources | Note |
| Safir | Sagem | Early Renault petrol multipoint | Earlier semi-sequential design |
| S2000 | Sagem | Clio II (1.2 to 1.6), Twingo, Kangoo, Laguna, Megane/Scenic, Espace, Vel Satis, 1998 to 2012; Clio III 1.6 16v per a DAMOS listing | 112-track on the Laguna; C167 MCU per AutoTuner; several sub-variants (PM2, RPM, PL4FC5) |
| S3000 | Sagem | Megane II phase 2, Scenic II, Clio III RS, Modus (K4J, K4M, F4R, F4R-T) | 128-track flash, torque structure; a 65,536-byte file is listed for a Megane RS |
| SIRIUS 32 / 34 | Siemens | Clio II RS 172 (SIRIUS 32) and 182 (SIRIUS 34) per tuner listings, which disagree with each other | Not Sagem. Clio 172/182 information concerns a Siemens car and does not apply to the S2000; see the Sirius tuning guide |
| SIM32 | Siemens | 1.2 16v petrol Renaults, 2005 to 2014 per a remanufacturer | A separate Siemens design, not Sagem |
| EMS3132 | Siemens | Renault/Dacia petrol (immobiliser listings) | Not Sagem; no remap method verified |
| EMS3150 / EMS3155 | Continental | Clio IV RS (EMS3150 on the EDC car, EMS3155 TC1782 on the 1.6T), Mk3 and later Megane RS | Newer generation; boot access per Abrites tables |
Checks before buying a tool licence
- Match the engine code, ECU label and software number with the vendor list, not just the model name.
- Check whether the vendor lists OBD or bench/boot access for that exact unit, and whether the immobiliser is involved.
- Do not assume that a Sagem file or tool works on a Siemens or Continental unit with a similar part number.
- Compare the length of the read with the file listing. Checksum plugins treat different Sagem file lengths as different cases, see files, checksums and WinOLS map packs.
For the Sagem vendor evidence see Sagem S2000 and S3000 tuning tool support. For the Siemens non-BMW family see Siemens petrol outside BMW and Simos.
Evidence limits
The table is compiled from tool-vendor and file-catalogue listings, not from ECU teardowns. The microcontrollers of the EMS3132 and SIM32 are unconfirmed, and the Megane RS Mk3 ECU designation is supported only by tuner listings (EMS3150 and later EMS3155 are named for the Clio IV RS). The Clio II RS SIRIUS designations come from tuner listings that disagree, with SIRIUS 32 for the 172 and SIRIUS 34 for the 182 in one case, so the ECU label should be used to confirm.
Sources
Revision 3: Renault engine ECU families: Sagem, Siemens and Continental identification
Why identification comes first
Tuning tools support one ECU and software family at a time, and file-catalogue names are often loose. A Megane, for instance, can carry a Sagem, a Siemens or a Continental petrol controller depending on generation and engine. The label and software identifiers should be read and the exact unit matched to the tool.
Families in the sources
| Family | Maker | Typical Renault applications named by sources | Note |
| Safir | Sagem | Early Renault petrol multipoint | Earlier semi-sequential design |
| S2000 | Sagem | Clio II (1.2 to 1.6), Twingo, Kangoo, Laguna, Megane/Scenic, Espace, Vel Satis, 1998 to 2012; Clio III 1.6 16v per a DAMOS listing | 112-track on the Laguna; C167 MCU per AutoTuner; several sub-variants (PM2, RPM, PL4FC5) |
| S3000 | Sagem | Megane II phase 2, Scenic II, Clio III RS, Modus (K4J, K4M, F4R, F4R-T) | 128-track flash, torque structure; a 65,536-byte file is listed for a Megane RS |
| SIRIUS 32 / 34 | Siemens | Clio II RS 172 (SIRIUS 32) and 182 (SIRIUS 34) per tuner listings, which disagree with each other | Not Sagem. Clio 172/182 information concerns a Siemens car and does not apply to the S2000; see the Sirius tuning guide |
| SIM32 | Siemens | 1.2 16v petrol Renaults, 2005 to 2014 per a remanufacturer | A separate Siemens design, not Sagem |
| EMS3132 | Siemens | Renault/Dacia petrol (immobiliser listings) | Not Sagem; no remap method verified |
| EMS3150 / EMS3155 | Continental | Clio IV RS (EMS3150 on the EDC car, EMS3155 TC1782 on the 1.6T), Mk3 and later Megane RS | Newer generation; boot access per Abrites tables |
Checks before buying a tool licence
- Match the engine code, ECU label and software number with the vendor list, not just the model name.
- Check whether the vendor lists OBD or bench/boot access for that exact unit, and whether the immobiliser is involved.
- Do not assume that a Sagem file or tool works on a Siemens or Continental unit with a similar part number.
- Compare the length of the read with the file listing. Checksum plugins treat different Sagem file lengths as different cases, see files, checksums and WinOLS map packs.
For the Sagem vendor evidence see Sagem S2000 and S3000 tuning tool support. For the Siemens non-BMW family see Siemens petrol outside BMW and Simos.
Evidence limits
The table is compiled from tool-vendor and file-catalogue listings, not from ECU teardowns. The microcontrollers of the EMS3132 and SIM32 are unconfirmed, and the Megane RS Mk3 ECU designation is supported only by tuner listings (EMS3150 and later EMS3155 are named for the Clio IV RS). The Clio II RS SIRIUS designations come from tuner listings that disagree, with SIRIUS 32 for the 172 and SIRIUS 34 for the 182 in one case, so the ECU label should be used to confirm.
Sources