Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Renault Tuning
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Continental, Renault, Sagem, Siemens

Why identification comes first

Tuning tools support one ECU and software family at a time, and file-catalogue names are often loose. A Megane, for instance, can carry a Sagem, a Siemens or a Continental petrol controller depending on generation and engine. Read the label and the software identifiers, then match the exact unit to the tool.

Families in the sources

FamilyMakerTypical Renault applications named by sourcesNote
SafirSagemEarly Renault petrol multipointEarlier semi-sequential design
S2000SagemClio II (1.2 to 1.6), Twingo, Kangoo, Laguna, Megane/Scenic, Espace, Vel Satis, 1998 to 2012; Clio III 1.6 16v per a DAMOS listing112-track on the Laguna; C167 MCU per AutoTuner; several sub-variants (PM2, RPM, PL4FC5)
S3000SagemMegane II phase 2, Scenic II, Clio III RS, Modus (K4J, K4M, F4R, F4R-T)128-track flash, torque structure; a 65,536-byte file is listed for a Megane RS
SIRIUS 32 / 34SiemensClio II RS 172 (SIRIUS 32) and 182 (SIRIUS 34) per tuner listings, which disagree with each otherNot Sagem. Clio 172/182 forum threads are about a Siemens car, so do not apply them to S2000
SIM32Siemens1.2 16v petrol Renaults, 2005 to 2014 per a remanufacturerA separate Siemens design, not Sagem
EMS3132SiemensRenault/Dacia petrol (immobiliser listings)Not Sagem; no remap method verified here
EMS3150 / EMS3155ContinentalClio IV RS (EMS3150 on the EDC car, EMS3155 TC1782 on the 1.6T), Mk3 and later Megane RSNewer generation; boot access per Abrites tables

Checks before you buy a tool licence

  • Match engine code, ECU label and software number with the vendor list, not just the model name.
  • Check whether the vendor lists OBD or bench/boot for that exact unit, and whether the immobiliser is involved.
  • Do not assume that a Sagem file or tool works on a Siemens or Continental unit with a similar part number.
  • Compare the length of your read with what the file listing says. Checksum plugins treat different Sagem file lengths as different cases, see files, checksums and WinOLS map packs.

For the Sagem vendor evidence see Sagem S2000 and S3000 tuning tool support. For the Siemens non-BMW family see Siemens petrol outside BMW and Simos.

Limits of this page

This is a search-based summary, not a teardown. I did not confirm EMS3132 or SIM32 microcontrollers, and I could not verify the Megane RS Mk3 ECU designation beyond tuner listings (EMS3150 and later EMS3155 are named for Clio IV RS). The Clio II RS SIRIUS designations come from tuner listings that disagree (SIRIUS 32 for the 172, SIRIUS 34 for the 182 in one case); confirm from the ECU label.

Sources