Tuning Wiki

This is a historical revision. Read the current page or return to its history.

Page organisation in this revision
Page type
Technical article
Subject
Modded Cars
Parent
Section level
Applies to
No ECU-specific applicability
Tool groups
None
Manufacturers
Jaguar

H.Jones documented changes to his 2012 Jaguar XFR in three stages, starting with a baseline on a Dynocom dynamometer in Calgary. His three initial pulls ranged from 453.4 to 457.5 wheel horsepower. Owner’s baseline runs

H.Jones’s white 2012 Jaguar XFR after its modifications

Pulley, exhaust and calibration

He fitted a Mina supercharger pulley and Mina exhaust, then returned for a second dyno session. He noted tyre slip on a subsequent pull and described the car’s stronger low-speed throttle response. A RICA ECU tune followed. Pulley and exhaust dyno update · Owner’s final modifications list

Final dyno results

The owner’s final graph shows three runs of 529.4, 559.7 and 567.9 hp. The highest run lists 492.2 lb-ft, while another run peaked at 494.4 lb-ft. H.Jones provided separate graphs comparing the baseline, pulley and exhaust, and final calibration. Final dyno graphs and owner’s comments

Dynocom graph showing three final XFR dyno runs and their peak figures

Car photograph and dyno graph posted by H.Jones on Jaguar Forums, reproduced with permission. Car photograph · Dyno graph